Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper SGT27540D manual Troubleshooting Adjustment, & Service

Models: SGT27540D

1 48
Download 48 pages 52.91 Kb
Page 38
Image 38

Troubleshooting,

Adjustment, & Service

TROUBLESHOOTING WARNING

While normal care and regular maintenance will extend the life of your equipment, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly.

The troubleshooting guide below lists the most common problems, their causes, and remedies.

See the information on the following pages for instruc- tions on how to perform most of these minor adjustments and service repairs yourself. If you prefer, all of these procedures can be performed for you by your local authorized dealer.

To avoid serious injury, perform maintenance on the tractor or mower only when the engine is stopped and the parking brake engaged.

Always remove the ignition key, disconnect the spark plug wire and fasten it away from the plug before beginning the maintenance, to prevent accidental starting of the engine.

TROUBLESHOOTING THE TRACTOR

PROBLEM

CAUSE

REMEDY

Engine will not turnover or start.

1.

Brake pedal not depressed.

Fully depress brake pedal.

 

2.

PTO (electric clutch) switch

Place in OFF position.

 

 

in ON position.

 

 

3.

Cruise control engaged.

Move lever to Neutral position.

 

4.

Out of fuel.

If engine is hot, allow it to cool, then refill

 

 

 

the fuel tank.

 

5.

Engine flooded.

Disengage choke.

 

6.

Circuit breaker tripped.

Wait one minute for automatic reset.

 

 

 

Replace if defective.

 

7.

Battery terminals require

See Battery Maintenance Section.

 

 

cleaning.

 

 

8.

Battery discharged or dead.

Recharge or replace.

 

9.

Wiring loose or broken.

Visually check wiring & replace broken or

 

 

 

frayed wires. Tighten loose connections.

 

10.

Solenoid or starter motor faulty.

See your dealer.

 

11.

Safety interlock switch faulty

See your dealer.

 

12.

Spark plug(s) faulty, fouled

Clean and gap or replace.

 

 

or incorrectly gapped.

See engine manual.

 

13.

Water in fuel.

Drain fuel & refill with fresh fuel. Replace fuel filter.

 

14.

Fuel is old or stale.

Drain fuel & refill with fresh fuel. Replace fuel filter.

 

 

 

 

Engine starts hard or runs poorly.

1.

Fuel mixture too rich.

Clean air filter. Check choke adjustment

 

2.

Spark plug(s) faulty, fouled, or

Clean and gap or replace.

 

 

incorrectly gapped.

See engine manual.

 

 

 

 

Engine knocks.

1.

Low oil level.

Check/add oil as required.

 

2.

Using wrong grade oil.

See engine manual.

 

 

 

 

Excessive oil consumption.

1.

Engine running too hot.

Clean: engine fins, blower screen, radiator,

 

 

 

oil cooler, and radiator screen.

 

2.

Using wrong weight oil.

See engine manual.

 

3.

Too much oil in crankcase.

Drain excess oil.

 

 

 

 

Engine exhaust is black.

1.

Dirty air filter.

Replace air filter. See engine manual.

 

2.

Choke closed.

Open choke.

 

 

 

 

Engine runs, but tractor will

1.

Ground speed control pedals

Depress pedals.

not drive.

 

not depressed.

 

 

2.

Transmission release lever

Move into drive position.

 

 

in “push” position.

 

 

3.

Drive belt is broken.

See Drive Belt Replacement.

 

4.

Drive belt slips.

See cause and remedy below.

 

5.

Parking brake is engaged.

Disengage parking brake.

36

Page 37 Page 39
Page 38
Image 38
Snapper SGT27540D manual Troubleshooting Adjustment, & Service
Page 37 Page 39

SGT27540D specifications

The Snapper SGT27540D is a robust and versatile lawn mower designed to cater to both residential and light commercial users. This model, known for its efficiency and ease of use, combines advanced technology with practical features, making yard maintenance a seamless task.

One of the standout features of the SGT27540D is its powerful 27 horsepower engine, which provides ample power for tackling various types of terrain and grass conditions. The engine’s design incorporates advanced cooling and lubrication systems, ensuring longevity and reduced maintenance needs. This lawn mower also features a self-propelled drive system, which allows users to effortlessly navigate through their yards without straining themselves.

The Snapper SGT27540D is equipped with a 54-inch cutting deck, facilitating a wide cutting swath that can efficiently cover large expanses of grass in a short amount of time. This deck features a robust steel construction for durability, and the adjustable cutting height offers versatility, allowing users to choose the perfect blade height based on their lawn’s requirements.

One of the defining technologies in the SGT27540D is the signature Snapper HiVac mowing system. This technology optimizes grass lifting, ensuring that even the toughest mowing jobs result in a clean and precise cut. As an added bonus, the HiVac system also improves grass clipping collection, making post-mowing cleanup a breeze.

Another notable characteristic of the Snapper SGT27540D is its user-friendly controls. The ergonomically designed steering lever allows for intuitive operation, while the dashboard provides essential information about speed and engine performance. For added comfort, the mower features an adjustable seat that can accommodate users of different heights.

The safety of operators is also a priority in the design of the SGT27540D. It is equipped with a reliable blade brake system that halts the blades quickly when necessary, minimizing the risk of accidents.

In summary, the Snapper SGT27540D is an exemplary lawn mower that marries durable construction with advanced technology. Its powerful engine, efficient cutting system, and user-friendly design make it a preferred choice for anyone seeking to maintain a pristine lawn with minimal effort and maximum results.