Safety Rules & Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

This mowing deck is capable of amputating hands and feet and throwing objects.

The triangle in text signifies important cautions or warnings which must be followed.

GENERAL OPERATION

1.Read, understand, and follow all instructions in the manual and on the unit before starting.

2.Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

3.Only allow responsible adults, who are familiar with the instructions, to operate the unit (local regulations can restrict operator age).

4.Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade(s).

5.Be sure the area is clear of other people before mow- ing. Stop the unit if anyone enters the area.

6.Never carry passengers.

7.Do not mow in reverse unless absolutely necessary. Always look down and behind before and while travel- ling in reverse.

8.Never direct discharge material toward anyone. Avoid discharging material against a wall or obstruc- tion. Material may ricochet back toward the operator. Stop the blade(s) when crossing gravel surfaces.

9.Do not operate the machine without the entire grass catcher, discharge guard (deflector), or other safety devices in place.

10.Slow down before turning.

11.Never leave a running unit unattended. Always disen- gage the PTO, set parking brake, stop engine, and remove keys before dismounting.

12.Disengage blades (PTO) when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

13.Operate the machine only in daylight or good artificial light.

14.Do not operate the unit while under the influence of alcohol or drugs.

15Watch for traffic when operating near or crossing roadways.

16.Use extra care when loading or unloading the unit into a trailer or truck.

17.Always wear eye protection when operating this unit.

18.Data indicates that operators, age 60 years and above, are involved in a large percentage of power equipment-related injuries. These operators should evaluate their ability to operate the equipment safely enough to protect themselves and others from injury.

19.Follow the manufacturer’s recommendations for wheel weights or counterweights.

20.Keep in mind the operator is responsible for accidents occurring to other people or property.

21.All drivers should seek and obtain professional and practical instruction.

22.Always wear substantial footwear and trousers. Never operate when barefoot or wearing sandals.

23.Before using, always visually check that the blades and blade hardware are present, intact, and secure. Replace worn or damaged parts.

24.Disengage attachments before: refueling, removing an attachment, making adjustments (unless the adjustment can be made from the operator’s posi- tion).

25.When the machine is parked, stored, or left unattend- ed, lower the cutting means unless a positive mechanical lock is used.

26.Before leaving the operator’s position for any reason, engage the parking brake (if equipped), disengage the PTO, stop the engine, and remove the key.

27.To reduce fire hazard, keep the unit free of grass, leaves, & excess oil. Do not stop or park over dry leaves, grass, or combustible materials.

28.It is a violation of California Public Resource Code Section 4442 to use or operate the engine on or near any forest-covered, brush-covered, or grass-covered land unless the exhaust system is equipped with a spark arrester meeting any applicable local or state laws. Other states or federal areas may have similar laws.

TRANSPORTING AND STORAGE

1.When transporting the unit on an open trailer, make sure it is facing forward, in the direction of travel. If the unit is facing backwards, wind lift could damage the unit.

2.Always observe safe refueling and fuel handling prac- tices when refueling the unit after transportation or storage.

3.Never store the unit (with fuel) in an enclosed poorly ventilated structure. Fuel vapors can travel to an ignition source (such as a furnace, water heater, etc.) and cause an explosion. Fuel vapor is also toxic to humans and animals.

4.Always follow the engine manual instructions for storage preparations before storing the unit for both short and long term periods.

5.Always follow the engine manual instructions for proper start-up procedures when returning the unit to service.

6.Never store the unit or fuel container inside where there is an open flame or pilot light, such as in a water heater. Allow unit to cool before storing.

4

Page 6
Image 6
Snapper SGT27540D manual Safety Rules & Information, General Operation

SGT27540D specifications

The Snapper SGT27540D is a robust and versatile lawn mower designed to cater to both residential and light commercial users. This model, known for its efficiency and ease of use, combines advanced technology with practical features, making yard maintenance a seamless task.

One of the standout features of the SGT27540D is its powerful 27 horsepower engine, which provides ample power for tackling various types of terrain and grass conditions. The engine’s design incorporates advanced cooling and lubrication systems, ensuring longevity and reduced maintenance needs. This lawn mower also features a self-propelled drive system, which allows users to effortlessly navigate through their yards without straining themselves.

The Snapper SGT27540D is equipped with a 54-inch cutting deck, facilitating a wide cutting swath that can efficiently cover large expanses of grass in a short amount of time. This deck features a robust steel construction for durability, and the adjustable cutting height offers versatility, allowing users to choose the perfect blade height based on their lawn’s requirements.

One of the defining technologies in the SGT27540D is the signature Snapper HiVac mowing system. This technology optimizes grass lifting, ensuring that even the toughest mowing jobs result in a clean and precise cut. As an added bonus, the HiVac system also improves grass clipping collection, making post-mowing cleanup a breeze.

Another notable characteristic of the Snapper SGT27540D is its user-friendly controls. The ergonomically designed steering lever allows for intuitive operation, while the dashboard provides essential information about speed and engine performance. For added comfort, the mower features an adjustable seat that can accommodate users of different heights.

The safety of operators is also a priority in the design of the SGT27540D. It is equipped with a reliable blade brake system that halts the blades quickly when necessary, minimizing the risk of accidents.

In summary, the Snapper SGT27540D is an exemplary lawn mower that marries durable construction with advanced technology. Its powerful engine, efficient cutting system, and user-friendly design make it a preferred choice for anyone seeking to maintain a pristine lawn with minimal effort and maximum results.