Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper SGT27540D manual Rear PTO Operation Select Models, Checks Before Starting

Models: SGT27540D

1 48
Download 48 pages 52.91 Kb
Page 22
Image 22

Operating the Tractor

540 Rear PTO Operation

(Select Models)

Checks Before Starting

Refer to the Maintenance & Adjustments sections of this manual and perform any needed service.

Connecting a Drive Shaft

1.Disengage the PTO, set the parking brake, stop the engine, and wait for all moving parts to stop.

2.Pull back on the locking collar (A, Figure 15) and slide the connector on the PTO shaft as far as it will go.

3.Pull back on the drive shaft until the locking collar snaps into place. Check that the connection is secure.

Starting & Stopping the PTO

1.Stop the engine and remove the key. Set the parking brake.

2.See Attachment Operator’s Manual or Installation Instructions to properly install/connect the attachment to be used. If connecting to a stationary attachment, set the parking brake during attachment operation.

3.Start the tractor engine. Allow the engine to warm-up for several minutes before engaging the PTO.

4.Set engine throttle to FULL

5.Place the PTO selector lever in the rear position (A, Figure 16) if only a rear attachment is being used. If a mid and rear attachment are being used simultane- ously, place the lever in the mid position (B). If only a mid or front attachment is being used, place the con- trol in position (C).

6.Pull UP on the PTO switch to engage the PTO.

7.When finished, move the throttle control to IDLE and push the PTO switch DOWN to disengage. Wait for all moving parts to stop.

8.When disconnecting the attachment, stop the engine, remove the key, and set the parking brake. Wait for all moving parts to stop.

Engine Speed Selection

When engaging the rear PTO, set the throttle to FULL.

When disengaging the rear PTO, set the throttle to IDLE and allow the attachment to slow down.

While using an attachment, always set the throttle to FULL.

A

Figure 15. Typical Drive Shaft

A. Locking Collar

A

B

C

Figure 16. PTO Selector Lever

A.Rear 540 PTO Active Only

B.Mid and Rear PTO Active

C.Mid PTO Active Only

20

Page 21 Page 23
Page 22
Image 22
Snapper SGT27540D manual Rear PTO Operation Select Models, Checks Before Starting, Connecting a Drive Shaft
Page 21 Page 23

SGT27540D specifications

The Snapper SGT27540D is a robust and versatile lawn mower designed to cater to both residential and light commercial users. This model, known for its efficiency and ease of use, combines advanced technology with practical features, making yard maintenance a seamless task.

One of the standout features of the SGT27540D is its powerful 27 horsepower engine, which provides ample power for tackling various types of terrain and grass conditions. The engine’s design incorporates advanced cooling and lubrication systems, ensuring longevity and reduced maintenance needs. This lawn mower also features a self-propelled drive system, which allows users to effortlessly navigate through their yards without straining themselves.

The Snapper SGT27540D is equipped with a 54-inch cutting deck, facilitating a wide cutting swath that can efficiently cover large expanses of grass in a short amount of time. This deck features a robust steel construction for durability, and the adjustable cutting height offers versatility, allowing users to choose the perfect blade height based on their lawn’s requirements.

One of the defining technologies in the SGT27540D is the signature Snapper HiVac mowing system. This technology optimizes grass lifting, ensuring that even the toughest mowing jobs result in a clean and precise cut. As an added bonus, the HiVac system also improves grass clipping collection, making post-mowing cleanup a breeze.

Another notable characteristic of the Snapper SGT27540D is its user-friendly controls. The ergonomically designed steering lever allows for intuitive operation, while the dashboard provides essential information about speed and engine performance. For added comfort, the mower features an adjustable seat that can accommodate users of different heights.

The safety of operators is also a priority in the design of the SGT27540D. It is equipped with a reliable blade brake system that halts the blades quickly when necessary, minimizing the risk of accidents.

In summary, the Snapper SGT27540D is an exemplary lawn mower that marries durable construction with advanced technology. Its powerful engine, efficient cutting system, and user-friendly design make it a preferred choice for anyone seeking to maintain a pristine lawn with minimal effort and maximum results.