Snapper SGT27540D Check Mower Deck Gear Box Oil, Safety Interlock System Check, Blade Brake Check

Models: SGT27540D

1 48
Download 48 pages 52.91 Kb
Page 32
Image 32

Regular Maintenance

Check Mower Deck Gear Box Oil

Service Interval: Every Fall & Spring

To check the mower deck gear box oil:

1.Place a shop towel under the side opening to keep oil off the belt and pulleys.

2.Remove the side level plug (B, Figure 31) of the gear box. Oil should come out of the side hole. If not add SAE 85W-90 oil through the top fill hole (A) until oil comes out the side fill hole.

3.Replace the plugs and wipe up any spilled oil.

Safety Interlock System Check

Service Interval: Every Fall & Spring

Check the function of the safety interlock system using the test procedure found on page 9 of this manual. If the tractor fails any of the tests, see your dealer.

Blade Brake Check

Service Interval: Every 100 Hours or Fall & Spring

The mower should come to a complete stop within five seconds after PTO switch is turned off.

1.With tractor in neutral, PTO disengaged and operator in seat, start the engine. Make sure the area is clear of bystanders.

2.Engage the PTO and wait several seconds. Disengage the PTO and check the amount of time it takes for the mower to stop.

3.If the mower does not stop within five seconds, see your dealer.

A

B

Figure 28. Gear Box Fill Plug Location

A.Top Fill Plug

B.Side Level Plug

30

Page 32
Image 32
Snapper SGT27540D manual Check Mower Deck Gear Box Oil, Safety Interlock System Check, Blade Brake Check