Snapper SGT27540D manual Dashboard Display Functions

Models: SGT27540D

1 48
Download 48 pages 52.91 Kb
Page 15
Image 15

Dashboard Display Functions

The dashboard display shows a variety of engine opera- tion and control status information, as explained in the descriptions below.

A. Irregular Voltage

Indicates that the voltage being produced by the charg- ing system and battery is higher or lower than normal levels.

B. Rear PTO Light

Indicates that the optional rear PTO is engaged.

C. Mid (Front) PTO Light

Indicates that the mid PTO is engaged.

D. Hour Meter/Clock

Displays number of hours the unit has been operated.

E. Cruise Control Light

Indicates that the cruise control is engaged.

F. Low Oil Pressure Light

Indicates that the engine oil pressure is low. If this indi- cator lights, shut the engine off immediately and contact your dealer.

G. 4 Wheel Drive Light (4WD Models Only)

Indicates that 4 wheel drive is engaged.

H. Fuel Separator Full Light

Indicates that the fuel separator is full and must be emp- tied.

I. Fuel Gauge

The fuel gauge shows the level of fuel in the fuel tank.

J. Tachometer

Displays the engine RPM. Normal operating speed is 3400 RPM. Do not operate at less than 3000 RPM dur- ing normal use.

K. Coolant Temperature

Shows the engine coolant temperature.

L. Glow Plug Light

Indicates that the glow plugs are heating. Leave the key in the run position until the light goes out, then turn the key to start.

Features & Controls

B

C

D

E

F

A

 

 

 

G

 

 

 

 

L

K

J

I

H

13

Page 15
Image 15
Snapper SGT27540D manual Dashboard Display Functions