Electrical Hook-up and Start-up Procedure (All Models)

IMPORTANT: Do not plug the unit in yet.

IMPORTANT: This equipment must be installed in compliance with applicable Federal, State and/or Local electrical codes having jurisdiction. Do not use extension cords. Make sure that the outlet the brewer plugs into is grounded.

IMPORTANT: Make sure that the Main Power Switch in the back of the unit is in the Off position before plugging in the brewer.

IMPORTANT: Domestic Q models at 208/230V must have a 4 wire electrical connection. The circuit must have 2 hots, 1 ground and 1 neutral wire. Failure to install with a 4 wire connection will void the manufacturer’s warranty. 208/230 Volt Grind’n Brew units require a 20 Amp circuit.

1.Plug the brewer into an electrical outlet (or run power to unit for hardwire applications).

2.Make sure the brew basket is inserted in the brew rails.

3.Reach to the back of the brewer and press the white Main Power Switch to the On position. The front control lights will go on, and water will enter the brewer. The tank will fill in 2-3 minutes from the moment the Main Power Switch is turned on.

4.Once the tank is full, it will take 10-15 minutes to heat the water to the brewing temperature. (Cut that time in half for the 230V “Q” models.) Once the Ready light is lit, you are ready to brew.

Operating the Touchpad (Refer to Figure B)

1.To select the appropriate bean hopper, press the hopper (left) button until the desired indicator arrow is illuminated.

NOTE: This step only applies to dual bean hoppers.

2.To select a portion size, press the center of the Portion Size (middle) button until the half pot or full pot symbol (depending on your need) is illuminated.

3.The Mode (right) button allows you to select either the “Brew Only”, “Grind Only” or “Grind and Brew” feature.

a)To grind only, press the center of the Mode (right) button until the grinder symbol is illuminated.

b)To brew only, press the center of the Mode (right) button until the coffee cup symbol is illuminated.

c)To grind and brew, press the Mode (right) button until both symbols are illuminated together.

Bean Selector

Half or Full Pot

Grind only

(Dual Bean Models Only)

 

Brew only

 

 

Grind and Brew Option

Figure B

(Single Bean Model)

(Dual Bean Model)

 

IMPORTANT: Brewers are factory set for throw weight and water portion. Please check that installation is correct before making adjustment. No adjustments should be necessary for normal installation.

Page 6

Grind’n Brew® Coffee Systems

Page 5 Page 7
Page 6
Image 6
Grindmaster 21H, 20H Electrical Hook-up and Start-up Procedure All Models, Operating the Touchpad Refer to Figure B
Page 5 Page 7

20H, 21H specifications

The Grindmaster 20H and 21H are robust, innovative espresso grinders designed to meet the demands of coffee shops and establishments that value precision and quality in their coffee production. These models stand out due to their advanced features, which cater to both high-volume usage and the desire for a consistent grind.

One of the main characteristics of the Grindmaster 20H and 21H is their powerful grinding mechanism. Equipped with high-quality ceramic burrs, these grinders provide an exceptionally uniform grind size, which is crucial for achieving the perfect extraction of coffee flavors. The ability to fine-tune the grind setting allows baristas to customize the grind for various espresso blends, ensuring that each shot is brewed to perfection.

Another significant feature of these models is their impressive grinding speed. With a grinding capacity that can handle a significant number of shots per minute, the Grindmaster 20H and 21H are ideal for busy coffee shops where efficiency is paramount. This capability helps reduce wait times during peak hours, enhancing customer satisfaction.

The design of the Grindmaster 20H and 21H is both ergonomic and user-friendly. The intuitive control panel allows baristas to easily adjust settings, making it straightforward to switch between different coffee blends. The grinders are also designed to minimize coffee retention, meaning less waste and fresher grounds for every cup.

Moreover, the Grindmaster 21H model includes additional smart technologies that enhance the grinding experience. Features like programmable dosing and digital displays offer even greater precision and ease of use. These technologies ensure that each dose of coffee is consistent, contributing to the overall quality of the espresso served.

In terms of build quality, both models boast a sturdy construction that ensures durability and longevity, making them a reliable investment for any coffee establishment. Their compact design allows for easy integration into various coffee setups without compromising on performance.

Overall, the Grindmaster 20H and 21H espresso grinders represent a perfect blend of innovation, efficiency, and reliability, making them essential tools for professional baristas and coffee enthusiasts alike. The advanced features and user-friendly design ensure that they can meet the high standards demanded by the modern coffee industry.
Top Page Image Contents