Programming (cont.)

To program the following items, press the Large, Right side portion button. (refer to Table 1)

1)

Temperature Scale:

Choose °F or °C

2)Set Water Tank Temperature: Choose between 170°F - 205°F

3)

EnErGy mOdE:

Choose YES or NO

4)

Ltn (Low Temp No Brew):

Choose YES or NO

 

 

• If YES, the brewer will only allow a brew to begin if the water tank

 

 

temperature is within 5°F of set point.

 

 

• If NO, the brewer will brew at any temperature.

5)

DriP time:

Choose from 40% to 80% of brew time.

 

 

This is the amount of time the brewer takes to completely drain the brew

 

 

basket after the brew valve closes. The factory default is 50%, so if the

 

 

brewer is set for a 1.5 gallon brew, without pre-infusion and pulses, the

 

 

brew basket will remain locked for 2 minutes after the brew valve closes.

 

 

If, with coffee, the brew basket drips for longer than 2 minutes, increase

 

 

the setting to 60% which will be 2:24 of drip time. The setting increases by

 

 

5% increments; 12 seconds each.

6)

rto (Set Bypass Ratio):

Choose Std or Grm

 

 

• Choose Std if you are using the standard sprayhead.

 

 

• Choose Grm if you are using the gourmet sprayhead.

Bypass ratio is the last global program parameter to be set. The following are the individual brew portion parameters. Each portion button can have individual brew sequences.

7)

Br time (Brew time):

Choose between 0:01 to 6:00 minutes.

 

 

This time setting controls the brew volume. The brewer brews at a rate of

 

 

1.5 gallons in four minutes (48 ounces per minute / 0.8 ounces per second).

 

 

The Large portion button is factory set to brew 1.5 gallons or 4 minutes of

 

 

brew time. Adjust the brew volume to desired level. One second of brew

 

 

time will change brew volume by 0.8 ounces.

8)

PrE inFuSion:

Choose OFF to 2:00 minutes.

 

 

This is the amount of pre-infusion desired with the batch of coffee. If no

 

 

pre-infusion is desired then set to OFF.

9)

PrE inFuSion oFF:

Choose 0.05 to 2:00 minutes.

 

 

This is the OFF time that allows the brew basket to drain the Pre-infused

 

 

volume of water.

10)

PuLSE br:

Choose OFF to 10

 

 

This will set the number of brew pulses desired. If none are desired, then

 

 

set to OFF.

11)

PuLSE on (Pulse ON time):

Choose 0:05 - 2:00 minutes

 

 

If pulses are set to 10, program the ON time for the pulses. The same ON

 

 

time is used on all pulses.

12)

PuLSE oFF (Pulse OFF time):

Choose 0:05 - 2:00 minutes

 

 

If pulses are set on step 10, then program the OFF time for the pulses. The

 

 

same OFF time is used on all pulses.

Shuttle Brewers & Airpot/Shuttle Brewers

Page 9

Page 8 Page 10
Page 9
Image 9
Grindmaster APB-430V2, APBVSA-330V2E230, APBIC-430V2, PBIC-430V2E230 EnErGy mOdE, DriP time, PrE inFuSion oFF, PuLSE br
Page 8 Page 10

APB-430V2E230, APBIC-330V2E230, APB-430V2, APBIC-330V2, APBVSA-430V2E230 specifications

Grindmaster’s lineup of commercial coffee brewing systems, including the APBVSA-330V2, APBIC-330V2, APBIC-430V2, APBVSA-430V2, and APB-430V2, is designed to meet the demands of high-volume coffee setups, offering a blend of efficiency, precision, and technology. These models are tailored for establishments such as cafes, restaurants, and convenience stores, where quality coffee is essential.

A prominent feature across these models is the advanced digital control system that ensures precise brewing temperatures and times. This technology is crucial for extracting the optimal flavor from coffee grounds. User-friendly touchscreen interfaces allow baristas to easily adjust settings, making these machines accessible even for less experienced staff.

The APBVSA (Auto Programmable Batching Variable Speed Appliances) series includes the APBVSA-330V2 and APBVSA-430V2, both known for their high-capacity brewing capabilities. They are equipped with variable speed pumps that enhance coffee extraction consistency. This feature is vital for operations that demand a steady volume of brew while maintaining high-quality standards. These models also incorporate brewing profiles that can be programmed to suit different types of coffee, allowing for customization based on customer preferences.

In contrast, the APBIC (Auto Programmable Batch Instant Coffee) versions, such as the APBIC-330V2 and APBIC-430V2, focus on instant coffee solutions. These machines provide an equally efficient service but are optimized for businesses that may not require the full range of brewing capacities. They offer quick brewing cycles and maintain a compact design, making them ideal for establishments with limited space.

The APB-430V2 represents a balance between capacity and versatility. This model features a dual brewing system allowing for simultaneous brewing of different coffee types, catering to diverse customer preferences effectively. The innovative thermal carafes that are often included with these models help maintain ideal serving temperatures without the risk of overbrewing.

All models feature robust construction and durable materials, ensuring longevity even in the busiest environments. Additionally, their energy-efficient systems are designed to reduce power consumption, appealing to environmentally conscious businesses.

In summary, the Grindmaster APB series combines technology with user-friendly operation, catering to the growing demand for high-quality, batch-brewed coffee in commercial settings. With their advanced features, each model serves a unique purpose, allowing businesses flexibility in meeting customer demands while optimizing their brewing operations.
Top Page Image Contents