Troubleshooting: Filling, Heating, and Brewing (con’t.)
Heating Problems
The heating system consists of the following components:
•Thermostat, located on the tank or on the front of top control panel under top cover.
•Heating Element, located on top of tank under top cover.
Problem | Possible Cause | Service Check | Remedy |
|
|
|
|
|
|
|
|
Tank does not | Thermostat faulty or | Make sure thermostat | Recalibrate thermostat. If no reme- |
heat. | out of calibration. | is turned on. | dy or thermostat does not cycle, |
|
|
| replace thermostat. |
|
|
|
|
| Heater faulty. | Check resistance | If resistance is much different than 7 |
|
| across elements with | to 10 ohms, replace heater. |
|
| wires disconnected. |
|
|
|
|
|
Recovery time is very | Heater faulty. | See above. | See above. |
long. |
|
|
|
|
|
|
|
If you still need help, call our Service Department at (800)
Prior authorization must be obtained from Grindmaster Technical Services Department for all warranty claims.
P200/RAPS200 Brewers | Page 9 |