3.At the voltage transformer, pull the fuse that is in the “220” slot and push it into the “440” slot (see Figure 8).
6.Open the motor cabinet door and remove the motor wiring covers from the main motor and the scoring motor (see Figure 10).
Fuse
Scoring | Main |
Motor | Motor |
Figure 8. Fuse installed at the 220V location.
4.Turn the dial (Figure 9) on the main motor overload relay to 15A.
Main Motor | Scoring | |
Motor Relay | ||
Overload | ||
| ||
Relay Dial |
|
Figure 10. Motor locations.
7.Rewire the motors as shown on the diagrams that are placed on the inside of the motor wir- ing covers.
Figure 9. Motor overload relays.
5.Remove the scoring motor overload relay and replace it with the 440V overload relay. Set the overload relay dial to 2A.
G0451 14" Sliding Table Saw |