Grizzly G0477 owner manual Inventory Figure Qty, Components and Hardware not shown

Inventory

The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them.

If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

Inventory (Figure 3)		Qty
A.	Long Frames	2
B.	short Frames	2
C.	plain Legs	2
D.	notched Legs	2
E.	Long Braces	2
F.	short Braces	2
G.	planer/moulder (not shown)	1
Components and Hardware (not shown)
•	Roller Adjustment Wrench	1
•	Open-End Wrench 8/10mm	1
•	Rubber Grip Magnets	2
•	Hex Wrench 4mm	1
•	dust Chute	1
•	Dust Chute Adapter	1
•	dust Collection Bag	1
•	Bag Clamp	1
•	Cap Screw M6-1 x 25	1
•	Button Head Cap Screw M6-1 x 25	1
•	Crank Handle	1
•	Handle Plug	1
•	Phillips Head Screw M6-1 x 25	1
•	Cap Screws #10-32 x 23⁄8"	2
•	Flat Washers #10	2
•	Wing Screws 1⁄4-20 x 11⁄4"	4
•	Flat Washers 1⁄4"	4
•	threaded Guide Inserts	12
•	Hex Bolts M8-1.25 x 80 (Stand)	4
•	Flat Washers 8mm (Stand)	8
•	Hex Nuts M8-1.25 (Stand)	4
•	Carriage Bolts 5⁄16-18 x 3⁄4" (Stand)	24
•	Flange Nuts 5⁄16-18 (Stand)	24

-12-

NOTICE

If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials. Often, these items get lost in packaging materials while unpack- ing or they are pre-installed at the factory.

B

A

F

E D C

Figure 3. G0477 Inventory.

The Model G0477 is a very heavy machine. Serious personal injury may occur if safe mov- ing methods are not fol- lowed. To be safe, you will need assistance when moving the ship- ping box and removing the machine from the box.

Model G0477 15" Planer/Moulder