Grizzly G0484 owner manual Inventory, Clean Up Clean Up

Inventory Inventory Clean Up Clean Up

After all the parts have been removed from the crate, you should have the following items with your machine:

Inventory: (Figure 3)		Qty
A.	Downfeed Handles	3
B.	Face Mill Assembly R8	1
C.	Adapter R8 - JT3	1
D.	Headstock Elevation Crank	1
E.	Wrench 24mm	1
F.	Hex Wrenches, 4, 5, 6 mm	1 Ea
G.	Handwheels	2
H.	Chuck 1–16mm JT3	1
I.	Chuck Key	1
J.	Handwheel Handles	2

The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or citrus-based degreaser such as Grizzly’s G7895 Citrus Degreaser. To clean thoroughly, some parts must be removed. For optimum performance from your machine, clean all moving parts or sliding contact surfaces. Avoid chlorine-based solvents, such as acetone or brake parts cleaner that may damage painted surfaces. Always follow the manufacturer’s instructions when using any type of cleaning product.

A

B

C

D

H

Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.

E

F

G

I

Many cleaning solvents are toxic if inhaled. Minimize

J

Figure 3. Model G0484 inventory.

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed. Check mount- ing locations before assuming that any items from the inventory list are missing.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

G0484 Gear Head Mill/Drill

your risk by only using these products in a well ventilated area.

G7895—Grizzly Citrus Degreaser

This natural, citrus-based degreaser is a great solution for removing export grease, and it’s much safer to work around than nasty solvents.

Figure 4. Grizzly citrus degreaser.

-11-