SECTION 4: OPERATIONS
Operation Safety |
| Control Panel |
|
|
|
|
|
|
Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving machinery.
NOTICE
If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
A.Power Lamp: Glows when the master power switch is ON.
B.Headstock Up Button: Controls the head- stock motor so the headstock is powerfed upwards.
C.Headstock Down Button: Controls the headstock motor so the headstock is power- fed downwards.
D.Emergency Stop Button: Stops the mill/ drill. Rotate the button clockwise until it pops back out to reset it.
E.Master Power Switch: Toggles main power to the machine.
F.Spindle Rotation Dial: Changes spindle rotation direction for milling/drilling operations. Spindle rotation must always be stopped before making direction changes.
A
B F
C | E |
|
D
Figure 11. Control panel.
G0484 Gear Head Mill/Drill