SECTION 4: OPERATIONS
Operation Safety
Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving machinery.
NOTICE
This bandsaw is for trained operators only. WE STRONGLY RECOMMEND that you read books, trade magazines, and get formal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
Vise
The vise on the Model G0592 can be positioned for cutting on both sides of the vise. It also has a ratcheting type leadscrew that allows for fast jaw adjustments.
To change vise positions:
1.Remove the chip trays and the splash guard.
2.Raise the bow to the maximum height and lock in place.
3.Loosen the two vise locks at the base of the vise and remove the upper chip tray (see Figure 15).
Vise Locks
Figure 15. Changing vise positions.
G0592 Metal Cutting Bandsaw |