Grizzly owner manual Spray gun G0592 Metal Cutting Bandsaw

Figure 26. Coolant system reservoir and cover.

4.Adjust the valves on the coolant hoses to control the flow of coolant (see Figure 27). Make sure that the pressure is not so high that coolant spills on the floor and creates a slipping hazard.

Coolant Control Valve

Figure 27. Coolant control valve.

5.Turn the coolant pump switch ON before making your cut.

NOTICE

Keep the tray chip screen clear so coolant can recycle to the pump reservoir. NEVER operate the pump with the reservoir below the low mark or you will over-heat the pump and void your warranty!

-26-

6.Monitor the coolant level frequently to keep the system working properly. DO NOT let coolant level fall out of view on the sight glass (see Figure 28).

Figure 28. Coolant level sight glass. To use the spray gun:

1.Close the coolant control valves.

2.Turn the coolant pump switch ON. You are ready to spray.

Figure 29. Spray gun.

G0592 Metal Cutting Bandsaw