Manuals / Grizzly / Power Tools / Saw

Grizzly G0592 owner manual Blade Tension Tracking, To tension the blade on the bandsaw

Models: G0592

1 60
Download 60 pages 33.65 Kb
Page 37
Image 37

Note: It is sometimes possible to flip the blade inside out, in which case the blade will be installed in the wrong direction. Check to make sure the blade teeth are facing toward the workpiece, as shown in Figure 44, after mounting on the bandsaw. Some blades will have a directional arrow as a guide.

Figure 44. Blade cutting direction.

8.When the blade is around both wheels, adjust the position so the back of the blade is against the shoulder of the wheels.

9.Complete the blade change by following the steps in the next section, Blade Tension & Tracking.

Blade Tension &

Tracking

Proper blade tension is essential to long blade life, straight cuts, and efficient cutting. The Model G0592 features a blade tension indicator to assist you with blade tensioning.

Two major signs that you do not have proper blade tension are: 1) the blade stalls in the cut and slips on the wheels, and 2) the blade frequently breaks from being too tight.

NOTICE

Loosen blade tension at the end of each day to prolong blade life.

G0592 Metal Cutting Bandsaw

To tension the blade on the bandsaw:

1.Turn the blade tension handle clockwise to tension the blade.

2.Use the graduated scale on the blade tension indicator (Figure 45) to determine blade ten- sion in PSI.

—For carbon blades, the blade tension should be 20,000 PSI.

—For bi-metal blades, like the one supplied with your machine, the blade should be tensioned from 30,000 to 35,000 PSI.

3.To fine tune blade tension, use a blade tensioning gauge, like the one found in SECTION 5: ACCESSORIES on Page 28. Please follow the instructions included with your gauge and the blade manufacturer's recommendations on blade tension.

Tracking Set Screw

Blade Tension Guide

Figure 45. Blade tension guide.

The blade tracking has been properly set at the factory. The tracking will rarely need to be adjusted if the bandsaw is used properly. The blade is tracking properly when the back of the blade is lightly touching the flange of both wheels.

To adjust the blade tracking on the bandsaw:

1.Turn the tracking set screw (hidden from view) in Figure 45 until the blade is tracking properly.

-35-

Page 36 Page 38
Page 37
Image 37
Grizzly G0592 Blade Tension Tracking, To tension the blade on the bandsaw, To adjust the blade tracking on the bandsaw
Page 36 Page 38

G0592 specifications

The Grizzly G0592 is a high-performance milling machine designed to meet the demands of both professional and hobbyist woodworkers. Known for its robust construction and precise engineering, this machine combines versatility with durability, making it an essential tool for any woodworking shop.

One of the standout features of the G0592 is its powerful motor, which offers a significant amount of torque, enabling it to handle a variety of materials with ease. The machine is equipped with a 3 HP motor that operates on 220V single-phase power, providing consistent performance for heavy-duty milling tasks. This high power helps to minimize stalling or bogging down during operation, ensuring smooth and efficient cutting.

The G0592 also boasts a generous working table made from precision-ground cast iron, measuring 9” x 49”. This extensive surface area allows for the handling of larger workpieces and offers ample space for stock support. The table is fitted with T-slots, allowing for easy attachment of jigs, fixtures, and clamping tools, enhancing the versatility of the machine.

Another notable characteristic is its adjustable dovetail ways, which provide enhanced stability and precision during operation. This design helps in maintaining alignment and reduces wear on the machine over time. Additionally, the G0592 features a variable speed drive that allows users to adjust the spindle speed from 60 to 4,000 RPM, accommodating various cutting applications ranging from heavy milling to delicate engraving.

The head of the G0592 is also a significant aspect of its design. It can be swiveled up to 90 degrees, facilitating angular cuts and increasing the range of milling operations possible. Moreover, the machine includes a digital readout (DRO) for both the table and spindle positions, providing real-time feedback and enhanced accuracy during operations.

Safety features, such as an emergency stop button and a protective enclosure around the spindle, are integrated into the G0592 to ensure a safe working environment. Overall, the Grizzly G0592 is engineered for those who value precision and performance in their milling tasks, making it a reliable choice in both professional and amateur settings. Its robust build, ample features, and user-friendly design distinguish it as a leading option in the milling machine market.