Manuals / Grizzly / Power Tools / Saw

Grizzly G0592 owner manual Maintenance, Schedule, Cleaning, Lubrication

Models: G0592

1 60
Download 60 pages 33.65 Kb
Page 32
Image 32

SECTION 6: MAINTENANCE

Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious person- al injury.

Schedule

For optimum performance from your machine, follow this maintenance schedule and refer to any specific instructions given in this section.

Daily Check:

•Loose mounting bolts.

•Damaged saw blade.

•Worn or damaged wires.

•Any other unsafe condition.

•Clean after each use.

•Proper blade tension.

•Coolant level.

Monthly Check:

•Lubricate vise screw.

•Check gear box fluid level.

Annual Check:

•Change gear box oil (every four months if being used daily).

Cleaning

Cleaning the Model G0592 is relatively easy. After using your bandsaw, remove excess chips by using the spray gun and by sweeping. Then remove chips for recycling.

-30-

Lubrication

Before applying lubricant to any area, wipe the area clean to avoid contamination. Lubricate the vise leadscrew and the grease fittings at the pivot point shown in Figure 38 with general purpose grease.

All bearings on the Model G0592 are lubricated and sealed for the life of the bearing. No further attention is needed until it is time to replace the bearing.

Drain Plug

Grease Fittings

Figure 38. Lubrication points.

The gearbox should be drained and refilled after the first 50 hours of use and then once every four months. Use a high quality, ISO 680 grade synthetic gear oil.

To change the gear oil:

1.Run the bandsaw for ten minutes to warm up the oil in the gearbox.

2.DISCONNECT THE BANDSAW FROM THE POWER SOURCE!

3.Raise the bow to the highest angle and close the feed control knob to lock the bow in posi- tion.

4.Drain the gearbox by removing the drain plug shown in Figure 38.

G0592 Metal Cutting Bandsaw

Page 31 Page 33
Page 32
Image 32
Grizzly G0592 owner manual Maintenance, Schedule, Cleaning, Lubrication
Page 31 Page 33

G0592 specifications

The Grizzly G0592 is a high-performance milling machine designed to meet the demands of both professional and hobbyist woodworkers. Known for its robust construction and precise engineering, this machine combines versatility with durability, making it an essential tool for any woodworking shop.

One of the standout features of the G0592 is its powerful motor, which offers a significant amount of torque, enabling it to handle a variety of materials with ease. The machine is equipped with a 3 HP motor that operates on 220V single-phase power, providing consistent performance for heavy-duty milling tasks. This high power helps to minimize stalling or bogging down during operation, ensuring smooth and efficient cutting.

The G0592 also boasts a generous working table made from precision-ground cast iron, measuring 9” x 49”. This extensive surface area allows for the handling of larger workpieces and offers ample space for stock support. The table is fitted with T-slots, allowing for easy attachment of jigs, fixtures, and clamping tools, enhancing the versatility of the machine.

Another notable characteristic is its adjustable dovetail ways, which provide enhanced stability and precision during operation. This design helps in maintaining alignment and reduces wear on the machine over time. Additionally, the G0592 features a variable speed drive that allows users to adjust the spindle speed from 60 to 4,000 RPM, accommodating various cutting applications ranging from heavy milling to delicate engraving.

The head of the G0592 is also a significant aspect of its design. It can be swiveled up to 90 degrees, facilitating angular cuts and increasing the range of milling operations possible. Moreover, the machine includes a digital readout (DRO) for both the table and spindle positions, providing real-time feedback and enhanced accuracy during operations.

Safety features, such as an emergency stop button and a protective enclosure around the spindle, are integrated into the G0592 to ensure a safe working environment. Overall, the Grizzly G0592 is engineered for those who value precision and performance in their milling tasks, making it a reliable choice in both professional and amateur settings. Its robust build, ample features, and user-friendly design distinguish it as a leading option in the milling machine market.