Mounting |
| Dust Collection |
|
|
|
|
|
|
Once you have confirmed that your machine is running properly, mount it to a workbench through the holes in the base.
The strongest mounting option is a "Through Mount" where holes are drilled all the way through the workbench, and hex bolts, washers, and hex nuts are used to secure the drill press to the workbench.
����
�����������
������������
��
�������
�����������
�����������
�������
Figure 7. Example of a through mount setup.
Another option for mounting is a "Direct Mount" where the machine is simply secured to the work- bench with a lag screw.
Use of a portable dust collector will greatly reduce the amount of wood chips and saw dust in the work area. In addition, dust collectors help extract wood chips and dust from the cutterhead area. This lessens the potential for damaging the workpiece or the planer when wood chips become caught between the knife and the workpiece dur- ing the planing process.
Dust collectors can be found in the Grizzly catalog or website and attachments suited spe- cifically to the Model G0663 Planer are shown in Accessories, Page 19.
���������
�����������
������������
���
��
����
Figure 8. Example of a direct mount setup.
G0663 12½" Planer |
