Grizzly G0704 owner manual Inventory, Contents Qty, Not Shown

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

Contents		Qty
A.	Mill/Drill w/Stand	1
B.	Open End Combo Wrench 17/19	1
C.	Open End Combo Wrench 8/10	1
D.	Bottle for Oil	1
E.	Tool Box	1
F.	Large Handwheel Handle	1
G.	Small Handwheel Handles	3
H.	T-Bolts M10-1.5 x 60 (vise mounting)	2
	Flat Washers 10mm (vise mounting)	2
	Hex Nuts M10-1.5 (vise mounting)	2
I.	Drill Chuck	1
J.	Chuck Key	1
K.	Phillips Screwdriver	1
L.	Flat Screwdriver	1
M.	Arbor B16 x R8	1
N.	Hex Wrench Set 2, 3, 4, 5, & 6mm	1 ea.
Not Shown:
	Hex Bolts M10-1.5 x 50	4
	Flat Washers 10mm	4

-14-

A

Figure 4. G0704 out of the crate.

NOTICE

If you cannot find an item on this list, check the mounting location on the machine or the packaging materials. Sometimes parts are pre-installed for shipping, or they become hidden by packaging materials.

Model G0704 (Mfg. since 09/09)