Grizzly G1014ZX owner manual Manual Insert, Combination Sander

Manual Insert

Model G1014ZX

Combination Sander

Introduction

The Model G1014ZX is the same sander as the Model G1014Z with the addition of the cabinet stand. Please use the included G1014Z manual for reference and for ordering parts that are not listed on the back of this insert.

Assembly

1.Insert 5⁄16-18 x 1" hex bolts into each of the rubber feet.

2.Secure the rubber feet to the bottom of the

cabinet stand with 5⁄16" flat washers and 5⁄16-	Figure 1. Model G1014ZX.
18 hex nuts.

3.With the help of an assistant, place the sand- ing unit on the top of the cabinet stand and attach it with 5⁄16-18 x 1⁄2" hex bolts and 5⁄16" flat washers.

4.Plug the motor power cord into the power cord protruding from the back of the cabi- net.

5.Complete the rest of the assembly and adjustments as explained in the G1014Z manual.

COPYRIGHT © MAY, 2005. BY GRIZZLY INDUSTRIAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#EW7245 PRINTED IN TAIWAN