SECTION 7: MAINTENANCE

GeneralKnives

Make a habit of inspecting your planer each time you use it. Check for the following conditions and repair or replace when necessary:

1.Loose mounting bolts.

2.Worn switch.

3.Worn or damaged cords and plugs.

4.Damaged V-belts.

5.Any other condition that could hamper the safe operation of this machine.

Table

The table and other non-painted surfaces on the Model G1021Z should be protected against rust and pitting. Wiping the table clean after every use ensures that moisture from wood dust isn’t allowed to trap moisture against bare metal sur- faces.

Some woodworkers recommend using automotive paste wax on exposed steel and cast iron sur- faces. The wax provides a layer of protection, as well as reducing friction between lumber and the table, making cuts faster and smoother. Avoid waxes that contain silicone or other synthetic ingredients. These materials can find their way into lumber that’s being worked, and can make staining and finishing difficult. If you use paste wax, make sure that it’s 100% Carnauba wax.

The inspection and setting of the planer knives is covered extensively in Section 5: Adjustments.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G1021Z 15" Planer

-33-