![](/images/new-backgrounds/1146286/14628629x1.webp)
shaped channel along the edge of wood stock.
Splitter: Metal plate attached to the back of the blade guard that maintains the kerf opening in the wood when performing a cutting operation.
Standard Kerf: 1Ú8" gap made with a standard blade.
Straightedge: A tool used to check the flatness, parallelness, or consistency of a surface(s).
Main Features
Set up and operation instructions will be easier to understand if you become familiar with the loca- tion and names of the basic features.
Match up the feature list below with the letters in Figure 7 to identify the table saw feature loca- tions.
Thin Kerf: 3Ú32" gap made with a thin kerf blade.
Rip Cut: A cut made along the grain of the wood.
Sacrificial Fence: A piece of wood attached to the face of the rip fence that is designed to extend the fence face away from the metal por- tion of the fence. Used primarily when making rabbet cuts with a dado blade.
I
A
B
C
H
G
F
E
D
Figure 7. The front of the table saw.
(Model SM Shown)
A. Extension Wing
B. On/Off Switch
C. Blade Angle Handwheel
D.Stand
E.Blade Height Handwheel
F.Rip Fence Rails
G.Rip Fence
H.Blade Guard/Splitter Assembly
I.Miter Gauge
|
|
|
|
|
|
|
|
|
|
|
|
G1022 Series Table Saws |