Grizzly G1028Z/G1029Z owner manual Setup Safety Unpacking, Items Needed for Setup, Inventory

Models: G1028Z/G1029Z

1 40
Download 40 pages 38.6 Kb
Page 14
Image 14

SECTION 3: SETUP

Setup Safety

 

Unpacking

 

 

 

 

 

 

This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!

Wear safety glasses dur- ing the entire setup pro- cess!

This machine and its com- ponents are very heavy. Get lifting help or use power lifting equipment such as a forklift to move heavy items.

Items Needed for

Setup

The following items are needed to complete the setup process, but are not included with your machine:

Description

Qty

Safety Glasses (for each person) .............. 1

Open End Wrench 12mm........................... 1

Phillips Head Screwdriver .......................... 1

-12-

Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover the machine is damaged, please imme- diately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi- tion of your shipment, inventory the contents.

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Inventory:

Qty

A.

Collector Body Assembly

........................... 1

B.

Base

1

C.

Upper Bag (Fabric)

1

D.

Lower Bag (Plastic)

1

E.

Lower Support Brackets

2

F.

Casters

4

G.

Rubber Gasket

1

H.

Upper Support Bracket

1

I.

Outlet

1

J.

Outlet Hose

1

K.

Hose Clamps

2

L.

Flange Bolts 516"-18 x 12"

......................... 36

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

G1028Z/G1029Z Dust Collector

Page 14
Image 14
Grizzly G1028Z/G1029Z owner manual Setup Safety Unpacking, Items Needed for Setup, Inventory