Grizzly G1028Z/G1029Z owner manual Upper collection bag secured

5.Secure the front lower support bracket to the collector with (2) 5⁄16"-18 x 1⁄2" flange bolts.

6.Place the upper support bracket over the lower support bracket, and secure with (2) 5⁄16"-18 x 1⁄2" flange bolts, as shown in Figure 9.

Note: The collector attaches to each sup- port bracket. The inside of the collector is funnel shaped and directs the air around in a cyclone motion. Make sure that the inside taper (funnel) is faced downward and the col- lector inlet faces toward the collector body.

Upper Support Bracket

Lower

Support

Bracket

Collector

Figure 9. Mounting collector to brackets.

7.Slip a loosened hose clamp over each end of the flex-hose, and attach the ends over the collector and collector body outlet. Tighten each hose clamp until snug, as shown in

Figure 10.

Flex Hose

Hose Clamp

Figure 10. Attaching flex hose onto collector

body outlet.

G1028Z/G1029Z Dust Collector

8.Hook the top loop of the upper filter bag (fabric) over the support bracket, as shown in

Figure 11.

Figure 11. Attaching upper filter bag.

9.Tighten the upper bag to the collector using the clamp shown in Figure 12.

Clamp

Figure 12. Upper collection bag secured.

-15-