SECTION 4: ASSEMBLY
Beginning Assembly | Base |
Disconnect power to the machine when perform- ing any maintenance, assembly or adjust- ments. Failure to do this may result in serious personal injury.
Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.
Wear safety glasses dur- ing the entire assembly process. Failure to com- ply may result in serious personal injury.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
We have organized the assembly process into steps. Please follow along in the order presented here.
Tools Required: 12mm open end wrench, regu- lar and Phillips head screwdriver.
Position the base plate upside down and locate the casters so they are within easy reach. Mount the casters to the base plate using sixteen (16)
Figure 2. Mounting casters to base.
G1028Z/G1029 Dust Collector |
