SECTION 7: MAINTENANCE
GeneralLubrication
Regular periodic maintenance on your Model G1060 Scroll Saw will ensure its optimum perfor- mance. Make a habit of inspecting your scroll saw each time you use it. Check for the following con- ditions and repair or replace when necessary.
Caution: Always perform any maintenance with the power off and the machine unplugged.
1.Loose bolts.
2.Worn switch.
3.Worn or damaged cords and plugs.
4.Any other condition that could hamper the safe operation of this machine.
Working Table
The working table can be kept slippery and rust- free with regular applications of talcum powder. Rub the powder into the table tops with either a felt brick
We do not recommend wax or paraffin; eventual- ly, the buildup will impede the smooth movement of your lumber over the table surfaces.
Lubricate the upper and lower guide arm bush- ings once a month. Light machine oil will be ade- quate. Damage to the motor may result if the bushings are allowed to run dry.
Figure 14.
|
|
|
|
|
|
|
|
|
|
|
|
G1060 22'' Scroll Saw | |||
