Spindle Turning

Before a workpiece is mounted into the lathe, the points of the installed spur center and the live center must align perfectly with one another (Figure 22). View the alignment from above the lathe and from the side.

Spur Center

Live Center

Figure 22.

To mount a workpiece between centers:

1.Locate the center point on both ends of the workpiece by carefully drawing diagonal lines from corner to corner. The point of inter- section is the center of the work. Find the center of round wood stock by using a center finder instrument.

2.When turning stock with a diameter greater than 2", remove the corner length edges with a hand plane or similar operation. DO NOT attempt to “round” square stock in the lathe. Serious personal injury many occur.

3.Hold the spindle vertically and support it on a solid surface. Line up the spur center with the center of the workpiece. Drive the spur center into the stock about 1⁄4" using a dead blow hammer. Be careful not to split the workpiece. See Figure 23. Wood with splits along the grain may fly off during the opera- tion. Note—With dense wood, drill a hole at the center and score lines with a saw blade for the spur center.

Figure 23.

4.Once the spur center is firmly attached to the workpiece, insert the spur center (with the attached workpiece) into the headstock spin- dle.

5.While supporting the workpiece, slide the tailstock close to the end of the workpiece and lock it into place.

Make sure the live center in the tailstock lines up with the spur center in the head- stock before turning anything between centers. Failure to observe this step could result in the workpiece being thrown from the lathe. Serious personal injury may occur.

6.Line up the live center with the workpiece center. Turn the handwheel to press the point of the live center into the workpiece. Note—With dense wood, drill a hole at the center and score lines with a saw blade for the live center.

Do not press too firmly or the bearings will bind and overheat. Likewise, do not adjust too loosely or the workpiece will spin off the lathe. Use good judgement. Serious personal injury could result if care is not taken.

7.Lock the tailstock in place.

 

 

 

 

 

 

 

 

-18-

 

 

G1067Z Wood Lathe

 

 

Page 19 Page 21
Page 20
Image 20
Grizzly G1067Z instruction manual Spindle Turning
Page 19 Page 21

G1067Z specifications

The Grizzly G1067Z is a versatile and powerful tool designed for woodworking enthusiasts and professionals alike. This premium table saw combines functionality, innovation, and convenience to deliver exceptional performance in various cutting tasks. Tailored for both hobbyists and serious woodworkers, the G1067Z stands out with its robust engineering and comprehensive features.

At the heart of the Grizzly G1067Z is a potent 2 HP motor, providing ample power to handle a wide range of materials including hardwood, softwood, and plywood. The motor drives a 10-inch blade, which can be adjusted for both height and angle, allowing for precise cuts in any scenario. With a maximum rip capacity of 30 inches to the right, and 12 inches to the left, users can confidently cut larger sheets of material without compromising accuracy.

One of the signature features of the G1067Z is its built-in gravity rise stand. This unique design not only offers stability during use but also allows for easy maneuverability and storage. The stand raises and lowers with minimal effort, ensuring that the table saw is always at the right height for the user, promoting ergonomics and reducing fatigue during extended projects.

Safety is a top priority with the Grizzly G1067Z. It comes equipped with an easy-to-access emergency shut-off switch, ensuring the user can quickly halt operation in case of unexpected situations. Additionally, the table saw includes a riving knife and blade guard, which help to prevent kickback and enhance user safety during cutting tasks.

Another notable characteristic of the G1067Z is its precision-engineered table surface, crafted from high-quality cast iron. This ensures maximum flatness and stability, contributing to accurate cuts. The extension wings provide additional surface area, essential for larger projects, while the integrated miter gauge and fence system offers straightforward adjustments for repeated accuracy.

In summary, the Grizzly G1067Z table saw is an outstanding choice for anyone serious about woodworking. Its powerful motor, innovative features, and commitment to safety and precision make it a cornerstone tool in any workshop. Whether you're cutting intricate joinery or tackling larger sheets of material, the G1067Z is equipped to meet the demands of any woodworking project, ensuring quality results every time.
Top Page Image Contents