Additional Safety Instructions For The Lathe

1.MAKE SURE ALL GUARDS are in place and that the Lathe sits on a flat, stable sur- face.

2.ALWAYS WEAR EYE PROTECTION or a face shield when operating the Lathe. All safety equipment should be ANSI approved.

3.USE A RESPIRATOR TO AVOID INHAL- ING DUST. All safety equipment should be ANSI approved.

4.BEFORE STARTING THE MACHINE be certain the workpiece has been properly imbedded on the headstock and tailstock centers and that there is adequate clearance for the full rotation.

5.ADJUST TOOL REST to provide proper support for the turning tool you will be using. Test tool rest clearance by rotating work- piece by hand before turning lathe on.

6.SELECT THE TURNING SPEED which is appropriate for the type of work. Allow the lathe to gain its full speed before using.

7.ALWAYS INSPECT THE CONDITION of the materials you are turning. Do not turn pieces with knots, splits and other potential- ly dangerous conditions.

8.KEEP LATHE TOOLS PROPERLY SHARPENED and hold firmly in the proper position when turning.

9.NEVER OPERATE THE LATHE WITH DAMAGED OR WORN PARTS. Maintain your lathe in proper working condition.

10.MAKE SURE YOUR WOOD LATHE IS TURNED OFF, disconnected from its power source and all moving parts have come to a complete stop before starting any inspection, adjustment, or mainte- nance procedure.

11.DO NOT LEAVE LATHE RUNNING UNATTENDED for any reason.

12.DO NOT STOP LATHE USING YOUR HAND against the workpiece.

13.KEEP LOOSE CLOTHING ARTICLES such as sleeves, belts and jewelry items away from the lathe spindle.

14.WHEN FACE PLATE TURNING, use lathe chisels on the downward spinning side of the workpiece only.

15.REMOVE THE TOOL REST when per- forming sanding or polishing operations on the rotating spindle.

16.ATTEMPTING TO REMOVE too much material at once may cause work material to fly out of the lathe.

17.THE JOINTS OF GLUED-UP WORK- PIECES should be high quality to prevent them from breaking under the extreme forces of lathe turning. Consult in-depth trade manuals and instructional books for correct techniques when gluing up a work- piece from multiple pieces. If a joint fails during a lathe turning operation, serious injury or death could occur.

Like all machines there is danger associated with the Model G1067Z. Accidents are fre- quently caused by lack of familiarity or fail- ure to pay attention. Use this machine with respect and caution to lessen the possibility of operator injury. If normal safety precau- tions are overlooked or ignored, serious personal injury may occur.

-4-

No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious per- sonal injury, damage to equipment, or poor work results.

G1067Z Wood Lathe

Page 5 Page 7
Page 6
Image 6
Grizzly G1067Z instruction manual Additional Safety Instructions For The Lathe
Page 5 Page 7

G1067Z specifications

The Grizzly G1067Z is a versatile and powerful tool designed for woodworking enthusiasts and professionals alike. This premium table saw combines functionality, innovation, and convenience to deliver exceptional performance in various cutting tasks. Tailored for both hobbyists and serious woodworkers, the G1067Z stands out with its robust engineering and comprehensive features.

At the heart of the Grizzly G1067Z is a potent 2 HP motor, providing ample power to handle a wide range of materials including hardwood, softwood, and plywood. The motor drives a 10-inch blade, which can be adjusted for both height and angle, allowing for precise cuts in any scenario. With a maximum rip capacity of 30 inches to the right, and 12 inches to the left, users can confidently cut larger sheets of material without compromising accuracy.

One of the signature features of the G1067Z is its built-in gravity rise stand. This unique design not only offers stability during use but also allows for easy maneuverability and storage. The stand raises and lowers with minimal effort, ensuring that the table saw is always at the right height for the user, promoting ergonomics and reducing fatigue during extended projects.

Safety is a top priority with the Grizzly G1067Z. It comes equipped with an easy-to-access emergency shut-off switch, ensuring the user can quickly halt operation in case of unexpected situations. Additionally, the table saw includes a riving knife and blade guard, which help to prevent kickback and enhance user safety during cutting tasks.

Another notable characteristic of the G1067Z is its precision-engineered table surface, crafted from high-quality cast iron. This ensures maximum flatness and stability, contributing to accurate cuts. The extension wings provide additional surface area, essential for larger projects, while the integrated miter gauge and fence system offers straightforward adjustments for repeated accuracy.

In summary, the Grizzly G1067Z table saw is an outstanding choice for anyone serious about woodworking. Its powerful motor, innovative features, and commitment to safety and precision make it a cornerstone tool in any workshop. Whether you're cutting intricate joinery or tackling larger sheets of material, the G1067Z is equipped to meet the demands of any woodworking project, ensuring quality results every time.
Top Page Image Contents