Grizzly G1079, G1066Z instruction manual Unpacking Piece Inventory

Unpacking Piece Inventory

The Model G1066/G1066Z/G1079 Drum Sander is shipped from the manufacturer in a carefully packed carton. If you discover your machine is damaged after you have signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the contain- ers and all packing materials for possible inspec- tion by the carrier or its agent. Without the pack- ing materials, filing a freight claim can be difficult. If you need assistance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.

The Model G1066/G1066Z/G1079 is a heavy machine (approx. 430 and 285 lb. shipping weights respectively). DO NOT over-exert yourself while unpacking or moving your machine—get assistance. In the event that your Drum Sander must be moved up or down a flight of stairs, be sure that the stairs are capable of supporting the com- bined weight of people and the machine. Serious personal injury may occur if they are not.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

After all the parts have been removed from the carton, you should have:

•Drum Sander Unit

•Control Panel [G1066Z]

•4'' Dust Port (2)

•Crank Arm

•Crank Handle

•Paper Retaining Clip (2) [G1066/G1079]

•Self Tapping Screws #8 x 1⁄2" (8)

•Flat Washers #8 (8)

•3MM Hex Wrench

In the event that any non-proprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedien- cy, replacements can be obtained at your local hardware store.

NOTICE

A full parts list and breakdown can be found toward the end of this manual. For easier assembly, or to identify missing parts, please refer to the detailed illustrations at the end of the manual.

-8- G1066/G1066Z/G1079 Drum Sander