SECTION 2: GENERAL INFORMATION
Grizzly Industrial, Inc. is proud to offer its Model G1847, G1852, G1861 and G3811 Pneumatic Nailers and Staplers. These
These nailers comprise a large part of our com- plete line of nail nailers covering most applica- tions. The G1847 will shoot 18 Ga. staples between 1/2" and 7⁄8" long. The G3811 will shoot 18 Ga. staples between 7⁄8" and 1 3⁄16" long. The G1852 will shoot 18 Ga. brad nails between 3⁄8" and 13⁄16" long. The G1861 will shoot 18 Ga. brad nails between 5⁄8" and 19⁄16". Each will handle up to 100 fasteners.
We are also pleased to provide this manual with your pneumatic nailer/stapler. It was written to guide you through general operating procedures and safety considerations. It represents our lat- est effort to produce the best documentation pos- sible. If you have any criticisms that you feel we should address in our next printing, please write to us at the Bellingham, WA address at the end of this section.
The nailers and staplers described in this manual are powerful,
Please do not attempt to use these tools without familiarizing yourself with their instructions for assembly, adjustment, and safe operation. Failure to do so could result in serious personal injury, as well as prop- erty damage and damage to the tool.
Most important, we stand behind our machines. We have excellent service departments at your disposal should the need arise. If you have any service questions or parts requests, please call or write to us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone:(570)
Fax:(800)
Web Site: http://www.grizzly.com
To comment on this manual write to:
Grizzly Industrial, Inc.
C⁄O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227
To operate this, or any tool, safely and efficiently, it is essential to become as familiar with its char- acteristics as possible. Take as much time as necessary to become acquainted with your pneu- matic nailer. The time you invest before you begin to use your tool will be time well spent. Also, read all of the safety procedures. If you do not under- stand them, DO NOT operate your nailer.
ALWAYS wear
G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers |