Memo :
If positioning cannot be performed after waiting |
for several minutes, this means GPS reception |
is poor, and there is difficulty in receiving data. |
C.REVIEW/7
Move to an open place with no obstructions. |
Otherwise, GPS information will not be recorded |
when shooting is performed. |
Signal may not be received depending on |
circumstances such as locations that are |
indoors or surrounded by tall buildings, or the |
geographical conditions. |
Precision error may occur in the position |
BATT.RELEASE
A
B
.
P/OCWHGER 
DEVICE |
|
AV | HD/SD |
| SDI |
HDMI |
|
REMOTE |
|
DC | HOST |
|
INPUT2 | INPUT1 |
|
REC
information depending on the conditions of |
reception. |
Even when positioning is in progress, |
information may be disrupted depending on the |
condition of signal reception. |
Viewing Recorded Videos Immediately (Clip Review)
You can check (review) the last recorded video clip | ||
on the screen. | ||
However, the video clip cannot be played back if | ||
the settings of the camera recorder are different | ||
from the video format (Resolution/Frame & Bit | ||
Rate/SD Aspect) of the clip. | ||
( | P111 | [ Resolution ] ) |
( | P112 | [ 3Resolution ] ) |
( | P112 | [ Frame & Bit Rate ] ) |
( | P112 | [ 3Frame & Bit Rate ] ) |
( | P112 | [ SD Aspect ] ) |
Memo :
To use this function, assign “Clip Review” to any of the user buttons. “Clip Review” is assigned to [C.REVIEW/7] button in factory default.
“Clip Review” can also be assigned to other user
buttons.
( P38 [Assigning Functions to User Buttons] )
1Press the button assigned with the “Clip Review” function during standby (“STBY” is displayed).
Playback of the configured section starts.
Memo :
The video clip is played back according to the setting in [Main
setting (Last 5sec), the last 5 seconds of the clip is played back.
( P97 [ Clip Review ] )
When playback is complete, the camera recorder exits Clip Review and returns to “STBY” (recording standby) mode.
Caution :
During Clip Review, only the [CANCEL] and [REC] buttons are enabled.
Press the [CANCEL] button to cancel clip review and return to “STBY” (recording standby) mode. Press the [REC] button to cancel clip review and enter recording mode. It will take some time to start recording after the button is pressed.
When the last clip is less than 5 seconds, the whole clip is played back.
Only video clips in the currently selected slot can be reviewed.
When there are no clips in the selected slot, Clip Review function is disabled.
Clip Review is unavailable when Clip Continuous Rec is paused (“STBYC”, yellow text). To operate Clip Review, use the [CANCEL] button to set to “STBYC” (white text)
first.
( P77 [Clip Continuous Rec] )
Clip Review is unavailable when the camera recorder is connected to an external equipment and the equipment is in recording state.
Clip Review is unavailable when operating View Remote via network connection.
( P148 [View Remote Feature] )
Shooting
71
