JVC GY-HM650U specifications Monitoring Audio Sound During Recording Using a Headphone, Both

Monitoring Audio Sound

During Recording Using a

Headphone

You can check the recorded audio using headphone.

1

Shooting 2 3

MONITOR

CH1

BOTH

CH2

.

1Connect the headphone.

2Select the channel to monitor with the [MONITOR] selection switch.

Setting	Description
[CH1]	Outputs the audio recorded in [CH1].
[BOTH]	Outputs the audio recorded in
	[CH1/CH2].
[CH2]	Outputs the audio recorded in [CH2].

3Use the [MONITOR +/­] button to adjust the monitor volume.

Memo :

Audio during recording is not output from the monitor speaker.

Warning tone is output when there is an abnormality in the camera recorder or when the battery is low.

( P160 [Warning Tone] )

Selecting Audio Output Method When the [MONITOR] Selection Switch Is Set to “BOTH”

When a stereo type earphone jack is connected, perform the following setting to output stereo sound.

1Set the [MONITOR] selection switch to “BOTH”.

2Set [Main Menu]-[A/V Set]-[Audio Set]-[Monitor] to “Stereo”.

( P109 [ Monitor ] )

Memo :

You can set the volume of the warning tone in [Main Menu]-[A/V Set]-[Audio Set]-[Alarm Level]. (“Off”/“Low”/“Middle”/“High”)

( P109 [ Alarm Level ] )

62