![](/images/new-backgrounds/1316336/316336231x1.webp)
Menu Display and Detailed Settings
Clip Server
For setting the server and directory for uploading recorded clips in the SD card to the FTP server.
ClipFTP1 to ClipFTP4
(The name specified in the respective [Alias] items is displayed)
oAlias
For setting a name to distinguish the settings of this camera recorder.
The name set in this item will appear on the [FTP Upload] action screen of the thumbnail display. * Enter not more than 31 characters. oServer
For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.
*Enter not more than 127 characters using single byte alphanumeric characters (a to z, 0 to 9), singlebyte hyphen [], or dot [.].
oPort
Enter the FTP server port number to use using an integer between 1 and 65535.
(Default value: 21) oDir. Path
Enter the path name for the directory to upload to (“/pub”, “/home/user”, etc.)
* Enter not more than 127 characters. oUsername
Enter the user name for connecting to the FTP server.
* Enter not more than 31 characters. oPassword
Enter the password for connecting to the FTP server.
* Enter not more than 31 characters. oPASV Mode
For setting whether to set the communication mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a
connection from the FTP server to the camera cannot be established.
[Setting Values: On, ROff]
Reset Network
Restores all items in the [Network] menu to their default settings.