JVC GY-HM650U specifications Adjusting the Viewfinder

Adjusting the Contour

Use the [PEAKING +/－] button to adjust the contour of the LCD monitor.

(The contour of the viewfinder screen will also be adjusted at the same time.)

 The [+] button increases contour correction and the [－] button decreases contour correction.

 Press the [+] and [－] buttons simultaneously to return to standard settings.

 During adjustment, the contour level is displayed on the LCD monitor.

					ND 1 /64
			PEAKING	0	AE+6
					0dB
4030	20	10	0		F1. 6
				P13000K	1 / 100
.

Memo :

The [PEAKING +/­] operation is disabled in the Media mode, and its value is fixed at “­10”.

Adjusting the Contrast

Use the [LCD Contrast] menu to adjust the contrast of the LCD monitor.

 Adjust using [Main Menu]-[LCD/VF]-[LCD Contrast].

 Increasing the value increases the contrast. [Setting Values: +10 to ­10] (Default value: 0)



Adjusting the Viewfinder

You can change the brightness and peaking of the viewfinder screen according to your usage conditions.

Changing the brightness of the screen will not affect the recorded images.

1

PEAKING

2

.

Caution :

A high­definition viewfinder is used on this camera recorder in order to provide an accurate focusing environment. Due to the characteristic of the display device, colors may appear on the images when you blink your eyes. This is not a malfunction. It does not affect the recorded images, SDI output, AV output, or HDMI output.

1 Incline the viewfinder vertically to a position that enables easy viewing.

2Turn the visibility adjustment lever to adjust the visibility.

Turn the visibility adjustment lever to sharpen the image on the viewfinder screen.

3Adjust the brightness, contour, and contrast of the viewfinder screen.

Adjusting the Brightness

Use the [VF Bright] menu to adjust the brightness of the viewfinder screen.

 Adjust using [Main Menu]-[LCD/VF]-[VF Bright].

 Increasing the value increases the brightness. [Setting Values: +10 to ­10] (Default value: 0)

Adjusting the Contour

Use the [PEAKING +/­] button to adjust the contour of the viewfinder screen.

The contour of the LCD monitor will also be adjusted at the same time.

( P37 [Adjusting the Contour] )

Memo :

When [Main Menu]-[LCD/VF]-[LCD + VF] is set to “Off”, operate after switching to the viewfinder display by pressing the [DISPLAY] button for 2 seconds or longer.

The [PEAKING +/­] operation is disabled in the Media mode, and its value is fixed at “­10”.

Adjusting the Contrast

Use the [VF Contrast] menu to adjust the contrast of the viewfinder screen.

 Adjust using [Main Menu]-[LCD/VF]-[VF Contrast].

 Increasing the value increases the contrast. [Setting Values: +10 to ­10] (Default value: 0)

Preparations

37