Selecting and Performing Operations on Multiple Clips
Multiple clips can be selected during thumbnail screen or playback screen display.
After selecting multiple clips, perform appending/deleting of OK mark, deleting of clips using the action selection screen.
After selecting multiple clips, the selections will be canceled by the following operations.
When [Deselect All] in the action menu is selected
When exiting Media mode from the thumbnail screen
When removing the SD card
When switching the slot in use
Selecting Multiple Clips Randomly
1Move the cursor to a clip without check mark and press the [OIS/2] button.
A green check mark appears on the clip.
Selecting Multiple Clips Consecutively
1Press the [LOLUX/3] button.
2Select “Select Range” in the action selection screen, and press the Set button (R).
2
. |
| |
3 Move the cursor to the beginning (or end) |
| |
of the range for multiple selection, and |
| |
Playback | ||
press the Set button (R). | ||
Magenta check marks appear on the clips | ||
4 Move the cursor to the other end of the |
| |
range. |
| |
within the range. (Including clips that were |
| |
already selected.) |
| |
Gray check marks appear on selected clips |
| |
that are outside the range. |
|
1
3
.
2Repeat Step 1 to select multiple clips.
Multiple clips can be selected.
Press the [LOLUX/3] button while the
multiple clips are selected. |
|
|
| |
Appends OK mark together: |
|
|
| |
| [Add OK |
|
| 4 |
Deletes OK mark together: |
|
| ||
| ||||
| [Delete OK |
|
|
|
Uploading selected clips to the FTP server |
|
|
| |
| together: | . |
|
|
[FTP
Deletes selected clips together: [Delete
Memo :
Selecting clips appended with check mark and pressing the [OIS/2] button will cancel the selection.
If the operation is performed on multiple clips at the same time, a progress bar appears. You can stop the operation by pressing the Set button (R) while the operation is in progress. However, it is not possible to undo operations that are completed.
89
