
Marker and Safety Zone
Displays (Camera Mode
Only)
The marker and safety zone displays are useful in helping you determine the angle of view for the image according to the shooting purpose.
Example of display when [Aspect Ratio] = “4:3”, [Aspect Marker] = “Line+Halftone”, and [Center Mark] = “On”
Safety Zone
Center Mark
|
| . |
| Aspect Marker | |
|
|
|
|
| |
|
| Memo : |
|
| |
|
|
| |||
|
|
| You can turn On/Off the safety zone and center | ||
|
|
| mark displays using | ||
CameraFeatures |
| ||||
| |||||
| [Center Mark]. | ||||
| ( P105 [ Safety Zone ] ) |
| |||
Smoothening the Skin | |||||
|
| Color (Skin Detail | |||
|
| Function) |
The Skin Detail function can be used to reduce the contour enhancement of video signals for only the skin areas so as to produce a smoother skin tone.
1Set [Skin Detail] to “On”.
( P101 [ Skin Detail ] )
Set [Main
Memo :
You can specify the adjustment level for the contour enhancement of the skin tone in [Main
( P101 [ Level ] )
Color Bar Output
Color bars can be output on this camera recorder. Memo :
The audio test signals (1 kHz) can be output simultaneously with the color bar output.
( P108 [ Test Tone ] )
To Output the Color Bar Using the Menu
To output color bars, follow the setting procedure below.
1Set [Camera
( P95 [ Bars ] ) Color bars are output.
To Output the Color Bar Using the User Button
1Assign the “Bars” function to any of the
user buttons.
( P38 [Assigning Functions to User Buttons] )
2Press the user button that is assigned with “Bars”.
Color bars are output.
128