Connecting to the Network
Changing View Remote Function Settings
For performing setting for using the View Remote function.
A
B
C
.
A [Camera Name]
For setting the name that appears at the top left of the view screen.
Tapping the text input area displays a software keyboard.
If you are using a PC, enter using the PC keyboard.
By tapping the Go key after input is complete, the software keyboard disappears.
B[Restrictions]
For setting the buttons to be disabled on the View screen while in the locked mode.
[REC]:
For setting whether to disable the Stop Record button or zoom operation during recording.
Tap (click) each item to switch between [Unlock] and [Lock].
[Except REC]:
For setting whether to disable the Stop Record button or zoom operation in any mode other than the recording mode.
Tap (click) each item to switch between [Unlock] and [Lock].
C[OK]/[Cancel]
Tap (click) [OK] to save the settings.
Tap (click) [Cancel] to stop setting and return to the main [Settings] screen.
Changing Connection Setup
You can change the settings for each of the preset items on the [Wizard] screen of the camera recorder.
If all the items cannot be displayed in a single page, scroll down to display the remaining items.
Items that cannot be changed are grayed out according to the type of adapter connected and the mode of connection.
A
B
C
D
.
A Type of Adapter Connected
B Mode of Wireless LAN Connection C [Search Access Point] Button
Tap (click) to display a list of the detected access points.
The currently selected access point is indicated by a dot mark ().
.
