Connecting via Wireless LAN

Connection via Access Point

1Perform setting on the camera recorder, and start up the [Wizard] screen.

( P137 [Camera Setup for Network Connection] )

2[Wireless LAN] appears on the [Wizard] screen.

P2P Connection

You can access the web function of this camera recorder from devices such as a smartphone, tablet terminal, or PC.

1[Wireless LAN] appears on the [Wizard] screen.

.

3Press the I button to display the [Select Connection Type] screen.

Select “Connect with Access Point”. Follow the screen instructions to complete setting. Perform setting for the following.

Mode of connection

Method of setting

*SSID, type of encryption, Passphrase, and IP Address setting (“DHCP” or “Manual”) in cases other than WPS

Connecting

 

 

 

3

 

 

 

 

 

 

to

.

 

 

 

the

4

Setting is complete.

 

After setting is complete, you can access the

Network

 

camera recorder via a browser.

 

( P144 [Connecting via a Browser] )

 

 

.

2Press the I button to display the [Select Connection Type] screen.

Select “P2P”.

Follow the screen instructions to complete setting.

Perform setting for the following.

Mode of connection

Method of setting

*SSID and Passphrase in cases other than

WPS

2

.

Memo :

When “WPS” is selected in the [Select Setup Type] screen, the following steps 3and 4are not required.

3Set the camera recorder to the Camera mode, and display the [Network] (status) screen.

Press the [STATUS] button on the camera recorder to display the status screen. Press the cross­shaped button (HI) to display the [Network] screen.

Check to ensure that the [SSID] and [Passphrase] that you have set in the wizard are displayed.

138

Page 138
Image 138
JVC GY-HM650U specifications 138, Connecting via Wireless LAN