JVC GY-HM650U specifications Connecting Headphone, 135, Connecting via SDI, External

Connecting via SDI

Digital video signals, together with embedded (superimposed) audio signals and time code signals, are output for both the HD­SDI and SD­ SDI signals.

User’s bit output from the [HD/SD SDI] output terminal is used as a flag to determine valid video signals. Therefore, accurate values will not be output.

Memo :

The sampling frequency for embedded (superimposed) audio signals is 48 kHz. Time code of the built­in time generator as well as playback time code are also output.

Settings for SDI Down­Converted Output

You can select the method to “down convert” HD video images to SD images during SD­SDI output.

Set using [A/V Set]-[Video Set]-[SD Aspect].

The available modes include “Side Cut”, “Letter” (blackened at the top and bottom), and “Squeeze” (full size, compressed at the left and

right).

( P112 [ SD Aspect ] ) Memo :

When [Record Format]-[System] is set to “SD”, and [SD Aspect] is set to “4:3”, this item cannot be

selected.

( P111 [ System ] )

Connecting the

Headphone

Audio output from the [+] terminal can be selected using [A/V Set]-[Monitor] or the [MONITOR] selection switch on the camera

recorder.
( P109 [ Monitor ] )
 The different combinations of settings that are
output from the [+] terminal and monitor
speaker are as follows.				[+]
[MONITOR]	[Monitor]
Switch			terminal			Speaker *
	Settings
Settings			L		R
		­				CH1
[CH1]			CH1
[BOTH]		[Mix]	CH1+CH2			CH1+CH2
	[Stereo]		CH1		CH2
[CH2]		­	CH2			CH2
* Audio is output from the speaker only in Media
mode. Does not output in the Camera mode.
			INPUT2	INPUT1
					AUX
			POW
			ER
			/C
	BATT.RELEASE		HG
A	POWER
	/CHG
			REC
	DEVICE
	AV	HD/SD
B		SDI
	HDMI
	REMOTE						Connecting
	DC	HOST
stereo sound is output from the [+] terminal							External
.
Memo :
 If both CH1 and CH2 are built­in microphones,
regardless of the [MONITOR] switch setting and							Devices
[Monitor] setting.

135