JVC GY-HM650U specifications 104, Marker Settings Item

Menu Display and Detailed Settings

Type

For specifying the operation when the [FOCUS ASSIST/1] button is pressed.

( P49 [Focus Assist Function] )

ACCU­Focus:

Enables the Focus Assist and ACCU­Focus (forced focus) functions. The depth of field of the object becomes shallower to enable easier focusing. The ACCU­Focus function switches automatically to “Off” after about 10 seconds.

Normal:

Enables only the Focus Assist function. The focused area is displayed in color to enable easier focusing. Display color can be specified with [Color].

[Setting Values: ACCU­Focus, RNormal]

Color

For setting the display color of the focused area when Focus Assist is activated.

[Setting Values: RBlue, Green, Red]

Zebra

For selecting whether to display zebra patterns at the bright areas of the subject.

Select “On” to display zebra patterns or “Off” to hide.

[Setting Values: On, ROff]

Top

For setting the maximum luminance level for the zebra pattern display.

[Setting Values: Over, 100% to 5% (in 5% increments)] (R80%)

Bottom

For setting the minimum luminance level for the zebra pattern display.

[Setting Values: 100% to 0% (in 5% increments)] (R70%)

Memo :

The relation between Top and Bottom is such that Top>Bottom always holds. To maintain this relation when setting Top, the Bottom value is automatically corrected.

Marker Settings Item

For setting the marker and safety zone, which are useful in helping you determine the angle of view for the image according to the shooting purpose.

( P128 [Marker and Safety Zone Displays (Camera Mode Only)] )

Memo :

During Clip Review or when in the Media mode, the markers do not appear regardless of the setting.

Marker Settings

For setting whether to display marker, safety zone, and center marks on the screen.

[Setting Values: On, ROff]

Aspect Ratio

For selecting the final image aspect ratio to be used from the overall angle of view.

[Setting Values: 16:9(+4:3), 2.35:1, 1.85:1, R16:9, 1.75:1, 1.66:1, 14:9, 13:9, 4:3, 2.35:1 Center, 2.35:1 Top, 1.85:1 Center, 1.85:1 Top]

Memo :

When [System]-[Record Set]-[Record Format]-[SD Aspect] is set to “4:3”, this item is fixed at “4:3” and cannot be selected.

( P112 [ SD Aspect ] )

Aspect Marker

For specifying how boundary markers are to be used to indicate the parts of an image that are beyond the range of the aspect ratio selected in [Aspect Ratio].

 Line+Halftone:

Displays the boundary using lines, and areas outside the boundary in halftone.

 Halftone:

Displays areas outside the boundary in halftone.  Line:

Displays the boundary using lines.  Off:

Hides the boundary markers.

[Setting Values: Line+Halftone, Halftone, Line, ROff]

Memo :

When [Aspect Ratio] is set to “16:9” or “16:9(+4:3)”, this item is fixed at “Off” and cannot be selected.

104