JVC GY-HM650U Adjusting the Camera Image, Using the Image Stabilizer, Is turned on or OFF

Automatic White Balance Mode (FAW: Fulltime Auto White balance)

Press the [WHT BAL] button on the side control panel to enter into Automatic White Balance mode.

“<FAW>” appears on the screen.

Set the [FULL AUTO] switch on the camera recorder to “ON” to enter Automatic White Balance mode. An appropriate white balance is automatically adjusted according to the color temperature of the lighting on the object.

White balance switching with the [WHT BAL B/A/PRESET] selection switch is disabled.

	00: 00: 00.00
	Jan 24 , 2012
		12 :34 : 56
				5 . 6f t
			ND 1 /64		FAW
				AE+6
4030 20 10 0				F1. 6
				0dB
	FAW		1 / 100

.

Caution :

The accuracy of [FAW] is inferior to that of Auto White Balance.

When the power of the camera recorder is turned on with the [FAW] mode selected, it takes about 15 seconds for the colors to stabilize.

Memo :

When [Main Menu]-[Camera Function]- [User Switch Set]-[AE Lock] is set to “AE/WB”, the white balance when the user button that is assigned [AE Lock] is pressed can be fixed.

( P98 [ AE Lock ] )

Adjusting the Camera Image

The picture quality of the camera can be set using the [Camera Process] menu.

As the adjustments are shown on the screen, you can adjust the values while checking the picture quality on the camera.

 [Detail]

 [Master Black]  [Black Toe]  [Knee]

 [White Clip]  [Gamma]  [WDR]

 [White Balance]

 [Color Matrix]

 [Color Gain]

 [Reverse Picture]

Memo :

For details of the respective items, see the [Camera Process] menu.

( P98 [Camera Process Menu] )

Using the Image Stabilizer

Reduces blurring of images due to camera shake.

1 Check whether the image stabilizer feature
is turned ON or OFF.
If the image stabilizer icon (/) does not							Shooting
				00: 00: 00.00
appear on the screen display, the image
stabilizer function is OFF.
				Jan 24 , 2012
				12 :34 : 56
						5 . 6f t
					ND 1 /64
						AE+6
						0dB
4030	20	10	0			F1. 6
				P13000K	1/ 100

.

2Press the [OIS/2] button to turn ON the image stabilizer feature (when image stabilizer feature is OFF).

The image stabilizer feature switches between ON and OFF with every press of the [OIS/2] button.

OFF:

Use this setting when the camera recorder is secured, such as when using a tripod.

ON:

Reduces blurring of images due to camera shake.

Memo :

Select [Main Menu]-[Camera Function]- [OIS]-[Level] to set the correction level.

( P95 [ Level ] )

Correction by this feature may not be sufficient when camera shake is too strong.

“OIS” is assigned to [OIS/2] button in factory default.

“OIS” can also be assigned to other user

buttons.

( P38 [Assigning Functions to User Buttons] )

59