
Shooting
Caution :
To perform recording in the Dual Rec mode, it is recommended that you start recording by making use of two cards with the same capacity and from the formatted state.
You can combine the use of the Dual Rec mode with a special recording mode. While in the Dual Rec mode, you can also set [Rec Mode] to “Normal”, “Pre Rec”, “Clip Continuous”, “Interval Rec”, “Frame Rec”, or “Variable Frame”. When [Main
“Clip Continuous” cannot be selected.
( | P76 [Special Recording] ) | |
( | P113 | [ Rec Mode ] ) |
( | P111 | [ Format ] ) |
When both slots are inserted with recordable cards, the Dual Rec (simultaneous recording) operation can be performed. If a recordable media is only inserted in one of the slots, you can also start recording with one card.
In the Dual Rec mode, continuous recording by switching from one slot to another cannot be performed. Continuous recording will not be performed if a recordable media is inserted in a slot after recording to the other slot has started.
When recording to one slot is in progress with the recorder set to the Dual Rec mode, inserting a recordable media to the other slot does not enable the Dual Rec operation. To perform the Dual Rec operation, stop recording temporarily (excluding pausing recording in the Clip Continuous Rec mode), and start again.
When one of the cards is accidentally removed while recording is in progress in the Dual Rec mode, recording to the card in the other slot will continue. However, repair of the accidentally removed card by the recovery function may fail.
If an error occurs on one of the cards while recording is in progress in the Dual Rec mode, recording of the erroneous card stops, while that of the other card continues.
Operations on clips recorded in the Dual Rec mode, such as clip deletion in the Media mode or appending of OK marks, can only be performed on the card in the selected slot.
Backup Rec
The Backup Rec mode allows you to make use of the media in slot B for backup recording by controlling the starting and stopping of recording in slot B without using the [REC] button.
Start or stop the recording using [Main Menu]-
( | P114 [ Slot Mode ] ) |
|
|
|
|
| |||||
( | P97 [User Switch Set Item] ) |
|
|
|
| ||||||
| Slot B starts | Slot A starts Slot A stops | Slot B stops | ||||||||
| recording | recording | recording | recording | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Slot A |
|
|
|
|
|
|
|
| ||
|
|
|
| Clip 2 |
|
|
|
| |||
| Slot B |
|
|
|
|
|
| ||||
|
| Clip 1 |
| Clip 2 | Clip 3 |
|
|
.
Memo :
During the Backup Rec mode (when [Slot Mode] is set to “Backup”), you can control
recording to the 2 slots at different timings, and backup recording can only be performed on this camera recorder.
( P114 [ Slot Mode ] )
You can record without worrying about missing the important scenes by setting slot B to be always recording (backup recording) and using the [REC] button to start/stop recording of only the required scenes in slot A.
It is recommended to use a media with high capacity in slot B.
When [Main
performed.
( P111 [ Format ] )
74