JVC GY-HM650U specifications Clip Continuous Rec

1Set [Rec Mode] to “Pre Rec”.

( P113 [ Rec Mode ] )

Set [Main Menu]-[System]-[Record Set]-[Rec Mode] to “Pre Rec”.

The display changes (“STBY”-“STBYP”).

2Press the [REC] button to start recording in Pre Rec mode.

The display changes (“STBYP”-

“RRECP”) and the card slot status indicator lights up in red.

Press the [REC] button again to pause recording. The display changes (“RRECP” -“STBYP”) and the card slot status indicator lights up in green.

Caution :

When the interval between start and stop recording is short, “STBYP” may not be displayed immediately after recording is complete.

“RRECP”-“STBYP” (“STBY” blinks in red) -“STBYP” is displayed.

When the SD card becomes full during recording, recording stops and “STOP” is displayed.

Video and audio before the above mentioned time may not be recorded after recording starts in the following cases.

Immediately after power on

Immediately after recording stops

Immediately after switching from Media mode to Camera mode

Immediately after setting [Rec Mode]

Immediately after the end of Clip Review

Immediately after changing file format

Immediately after changing video format

Clip Continuous Rec

 In normal recording, when the recording stops, the image, audio, and accompanying data from the start till the end of the recording are recorded as one “clip” on the SD card.

 This mode allows you to consolidate several rounds of “startstop recording” into one clip.

Example:

In normal recording, three clips are generated as Recording 1, Recording 2, and Recording 3. However, recording in this mode generates only one clip.

Press [REC]		Press [REC]		Press [REC]
(Recording starts)		(Recording resumes)		(Recording resumes)
	Press [REC]		Press [REC]		Press and hold [REC]
	(Recording pauses)		(Recording pauses)		(Recording stops)
	Recording 1		Recording 2		Recording 3

Completed Clip (Recorded video and audio)

Recording 1 Recording 2Recording 3

.

1Set “Rec Mode” to “Clip Continuous”.

( P113 [ Rec Mode ] )

Set [Main Menu]-[System]-[Record Set]-[Rec Mode] to “Clip Continuous”.

The display changes (“STBY”-“STBYC”).

2Start recording. (Recording 1)

Press the [REC] button to start recording in Clip Continuous mode.

The display changes (“STBYC”-

“RRECC”) and the card slot status indicator lights up in red.

3Pause recording.

Press the [REC] button again to pause recording. The display changes (“RRECC” -“STBYC” (yellow text)).

The card slot status indicator remains lighted in red.

Memo :

When the [CANCEL] button is pressed while the camera recorder is paused (STBYC), the display changes (“STBYC” (yellow text) -“STBYC” (blinking yellow text) -“STBYC” (white text)), and a “clip” is generated. The card slot status indicator lights up in green.

4Resume recording. (Recording 2)

Press the [REC] button again to resume recording. The display changes (“STBYC” (yellow text) -“RRECC”).

The card slot status indicator remains lighted in red.

Shooting

77