Settings and Adjustments Before Use
.
Adjusting the Grip Belt
Open the pad and adjust the position of the grip belt accordingly.
INPUT2 | INPUT1 |
|
BATT.RELEASE |
|
A |
|
POWER |
|
/CHG |
|
| REC |
DEVICE |
|
AV | HD/SD |
B | SDI |
HDMI |
|
REMOTE |
|
DC | HOST |
|
.
Caution :
If the grip is loose, the camera recorder may fall off resulting in injuries or malfunction.
Attaching an External Microphone
You can attach a separately sold microphone to the microphone holder.
1, 3 
2
4 
5
.
1Turn the knob on the microphone holder anticlockwise to loosen and open the microphone holder.
2Place the microphone in the microphone holder.
3Turn the knob on the microphone holder clockwise to secure the microphone.
4Connect the microphone cable to the [INPUT1] or [INPUT2] terminal.
5Pin the microphone cable to the clamp.
6Perform the settings for the microphone correctly.
( P60 [Audio Recording] )
Attaching the Tripod
Use the screw hole at the bottom of this camera recorder.
(3/8×16UNC, 1/4×20UNC)
Use the screw hole that suits the tripod.
To prevent the camera recorder from falling off, which may result in injuries or damages, read the instruction manual of the tripod to be used and make sure that it is securely attached.
Preparations
oBottom
.
Caution :
Use the tripod on a stable surface.
To prevent the camera recorder from falling, attach securely using the rotation prevention hole.
Use screws with screw length 5 mm and below.
Attaching the Large Eyecup
Attach the large eyecup to prevent external light from entering the viewfinder screen and cameraman’s vision.
Align and attach to the groove of the eyecup mounted on the camera recorder.
The large eyecup can be attached in any direction.
Large Eyecup (supplied)
Eyecup
.
Memo :
Do not remove the eyecup that is premounted on the camera recorder.
27
