Preparations
Initial Settings
When the power is first turned on, the Initial Setting screen for performing the initial settings in the camera recorder appears.
Set the date/time of the builtin clock in the [Initial Setting] screen.
All operations are disabled until initial settings are complete.
|
| MENU/THUMB |
|
| CANCEL |
MENU/THUMB | AE LEVEL | POWER |
|
ON
OFF (CHG)
MODE
CANCEL
.
Memo :
It is recommended to use the AC adapter as the power supply.
Be sure to close the lens cover.
1 Hold down the lock button (blue) at the center of the [POWER ON/OFF(CHG)] switch to set to “ON”.
The Initial Setting screen appears.
2Ensure that the lens cover is closed, and press the Set button (R).
Selfdiagnosis starts.
A progress bar appears, and “Complete Diagnosis” appears when the diagnosis is complete.
.
Memo :
It takes about 6 minutes to complete the diagnosis. During the diagnosis, do not operate or turn off the camera recorder.
3Press the Set button (R) after confirming the exit screen.
The [Initial Setting] screen appears.
For GYHM650U
.
. For GYHM650E
.
32
