Shooting

5Pause recording.

Press the [REC] button again to pause recording. The display changes (“RRECC” -“STBYC” (yellow text)).

The card slot status indicator remains lighted in red.

6Resume recording. (Recording 3)

Press the [REC] button again to resume recording. The display changes (“STBYC” (yellow text) -“RRECC”).

The card slot status indicator remains lighted in red.

7Press and hold the [REC] button.

Recording stops and the display changes (“RRECC”-“STBYC”). A “clip” is generated.

The card slot status indicator lights up in green.

8Press the [REC] button again.

The display changes (“STBYC”-

“RRECC”) and the card slot status indicator lights up in red.

A new “clip” is generated from here.

Memo :

The following operations cannot be performed while recording is paused (STBYC, yellow text).



Clip Review operation

(

P71 [Viewing Recorded Videos Immediately

(Clip Review)] )



Switching SD card slots



Switching operation mode

(

P18 [Operation Modes] )

Files are split into sizes of 4 GB (or 30 minutes) regardless of the menu settings.

Caution :

Do not remove the SD card during recording (RRECC, red text) or recording pause (STBYC, yellow text).

To remove the SD card in the “Clip Continuous” mode, press the [CANCEL] button, check that “STBYC” (white text) is displayed and the card slot status indicator lights up in green before you remove the card.

When the SD card becomes full during recording, recording stops and “STOP” is displayed.

When the [POWER ON/OFF(CHG)] switch is turned off during recording or recording pause, recording stops and power is cut off after a clip is generated.

Caution :

If the power is cut off due to low battery power, a proper clip may not be generated.

When [Format]/[3Format] in the [Main Menu]-[System]-[Record Set]-[Record Format] menu is set to “AVCHD”, Clip

Continuous Rec cannot be performed.

(

P111 [ Format ] )

(

P112 [ 3Format ] )

Frame Rec

In normal recording, when the recording stops, the image and accompanying data from the start till the end of the recording are recorded as one “clip” on the SD card.

In this mode, recording starts with every press of the [REC] button, and only the specified number of frames is recorded.

The recording can be written to the media as a single clip until it is stopped.

Memo :

Audio will not be recorded.

Until a specified amount of recordings is accumulated, the file cannot be written to the media.

If the specified amount is not reached when recording is stopped, normal recording is performed and frames are added to the ending of the clip until the amount is reached. (Padding)

After the specified number of frames is recorded and written to the media, recording will be performed until the same number is accumulated again.

Press [REC]

 

 

 

 

 

 

Press and hold [REC]

(Frame Rec starts)

 

 

 

(Frame Rec stops)

 

 

 

Press [REC]

Press [REC]

 

 

 

 

 

 

 

Recording resumes

Recording resumes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Normal

 

recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pause

Pause

 

 

Pause

(Padding data)

 

 

Records number of frames specified in [Rec Frames]

 

 

 

 

Actual clips recorded to the media

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specific amount of data

 

 

 

 

78

Page 78
Image 78
JVC GY-HM650U specifications Frame Rec, Press and hold the REC button, Press the REC button again