
User Switch Set Item
USER1 USER7, LCD KEY▲/LCD KEY▶/LCD KEY▼/LCD KEY◀
By assigning one of the following functions to each of the [FOCUS ASSIST/1], [OIS/2], [LOLUX/3], [AE LOCK/4], [ZEBRA/5], [MARKER/6], [C.REVIEW/7] buttons or the crossshaped buttons on the LCD monitor, these buttons can be used to control the assigned function (on/off, start, switch).
Set according to the shooting conditions. Usable only in the Camera mode.
[Setting Values: None, Zebra, Marker, Bars, Focus Assist, OIS, Flash Band, LCD Backlight, Lolux, AE Lock, Spot Meter, Face Detect, OK Mark, Clip Cutter Trig, Backup Trig, Clip Review, Load Picture File, White Balance, Preset Zoom1, Preset Zoom2, Preset Zoom3]
Lolux
To increase the sensitivity when in dim surroundings, set a value in the Lolux mode. [Setting Values: 36dB, R30dB]
Clip Review
For specifying the operation when any of the [USER1][USER7], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], or [LCD KEY◀] items is set to “Clip Review”.
Last 5sec:
Views about 5 seconds of the clip from the ending.
Top 5sec:
Views about 5 seconds of the clip from the beginning.
Clip:
Views the entire clip.
[Setting Values: RLast 5sec, Top 5sec, Clip]
Memo :
This item is selectable when any of the [USER1] [USER7], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], [LCD KEY◀] items is set to “Clip Review”.
Spot Meter
For specifying the operation when any of the [USER1][USER7], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], or [LCD KEY◀] items is set to “Spot Meter”.
( P68 [Setting Spot Meter] )
Max & Min:
Displays the brightest and darkest areas of the image.
Max:
Displays the brightest area of the image. Min:
Displays the darkest area of the image. Manual:
Displays the image brightness at a specified position.
[Setting Values: RMax & Min, Max, Min, Manual]
Face Detect
For specifying the operation when any of the [USER1][USER7], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], or [LCD KEY◀] items is set to “Face Detect”.
Select the control to track results of face detection. AF&AE:
Sets auto focus and exposure control for the face that is being tracked.
AF:
Sets auto focus for the face that is being tracked. [Setting Values: RAF&AE, AF]
Memo :
When “AF” is specified, this function will be activated only when the [FOCUS] switch is set to “Auto”.
When “AF&AE” is specified, this function will be activated only when the [FOCUS] switch is set to “Auto”, or when one or more of the items (Gain, Iris and Shutter) is set to Auto mode.
Sensitivity
For setting the level of ease of face detection. [Setting Values: Low, Middle, RHigh]
Menu Display and Detailed Settings
97