Warnings by Lamp and Warning Tone
Warning status is indicated by tally lamp and warning tone.
The tally lamp blinks.
The warning tone is output from the monitor speaker or [+] terminal.
Memo :
If you continue to use the camera recorder while the power warning is displayed, the camera recorder will stop automatically when the battery or supplied voltage from the AC adapter becomes lower.
Caution :
The remaining battery power and time are displayed as they are from the battery information. Accurate data may not be displayed depending on the battery condition. Replace the battery as soon as possible when the remaining battery power and time are low.
Turning On/Off the Power
Turning On the Power
1Hold down the lock button (blue) at the center of the [POWER ON/OFF(CHG)] switch to set to “ON”.
The camera recorder starts up in Camera mode and is ready for shooting.
Memo :
The camera recorder always start up in Camera mode when the [POWER ON/OFF(CHG)] switch is set to “ON”. Use the [MODE] button at
the side of the camera recorder to switch mode. ( P18 [Operation Modes] )
Turning Off the Power
Sets the camera recorder to the recording standby or stop mode.
1Hold down the lock button (blue) at the center of the [POWER ON/OFF(CHG)] switch to set to “OFF(CHG)”.
2Remove the battery and the power to the [DC] terminal (when not in use for a long time).
Auto Power Off function
When
the power turns off automatically when the camera | |
recorder is not operated for 5 minutes or longer | |
while running on battery. | |
( | P110 [ Auto Power Off ] ) |
Memo :
When both the battery and AC adapter are connected, power from the AC adapter connection will be used. As such, the [Auto Power Off] function will not have any effect.
Caution :
Do not set the [POWER ON/OFF(CHG)] switch to “OFF(CHG)” during recording. Check that the operation mode display is “STBY” or “STOP” before you turn off the power.
If you have mistakenly set the [POWER ON/ OFF(CHG)] switch to “OFF(CHG)” during recording, wait for 5 seconds or more before you turn on the power again.
When turning off the power, first set the [POWER ON/OFF(CHG)] switch of the camera recorder to “OFF(CHG)”. Do not remove the battery or turn off the AC power while the [POWER ON/OFF(CHG)] switch is set to “ON”.
Preparations
POWER
ON
OFF (CHG)
MODE
.
31
