Others
Error message | Status |
| Action |
Transfer Error. | Transfer failed due to | Execute again. | |
| communication failure. |
|
|
Invalid URL. | The path was deemed invalid by the Adjust the Server and Port settings | ||
| FTP server. | for [Metadata Server] or [Clip | |
|
| Server]. | |
|
| ( | P115 [ Metadata Server ] ) |
|
| ( | P116 [ Clip Server ] ) |
Media Access Error. | Reading/writing of the SD card | Insert a different SD card. | |
| failed while FTP transfer is in |
|
|
| progress. |
|
|
Internal Error. | An internal error has occurred while Adjust the settings and execute | ||
| FTP transfer is in progress. | again. | |
Other Error. | An unknown error or other errors | Adjust the settings and execute | |
| have occurred while FTP transfer is again. | ||
| in progress. |
|
|
Media Read Error. | Reading of the SD card failed while Insert a different SD card. | ||
| FTP transfer is in progress. |
|
|
Tally Lamp
The tally lamp start blinking when the remaining space on the SD card is running out during recording, or when the battery power is running low.
Blinking Mode | Remaining Battery Power/SD Card Space |
Blinks slowly | Battery power is low |
(once every second) | Remaining recording time on SD card is less than 3 minutes (during |
| recording) |
Blinks quickly | Remaining recording time on SD card is zero (during recording) |
(2 times per second) | Error on the camera recorder |
Warning Tone
Warning tone is output from the monitor speaker and [+] terminal when the battery level is low.
Warning tone is also output when an error occurs in the camera recorder.
Memo :
You can specify whether to turn on the warning tone as well as setting the volume in [A/V
( P109 [ Alarm Level ] )
