Preset Mode (PRESET)
Two different color temperature settings are registered on this camera recorder. You can switch between them using the [,] button. (Default setting: “3200K”)“5600K”)
Press the [,] button to switch to a different color temperature.
(“Preset Temp.”)“Alternative Temp.”)
1 Set the [WHT BAL B/A/PRESET] switch to “PRESET”.
2Press the [,] button.
Setting the [Preset Temp.] or [Alternative Temp.] Values
You can change both the color temperature settings in the Preset mode in the menu.
1Open the [Preset Temp.] or [Alternative Temp.] menu.
Select [Main
The Color Temperature setting screen appears.
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| Color Temperature | |||
|
|
| Detailed Selection | |||
Color Temperature Selection Screen | ||||||
|
|
| Screen | |||
.
2Select the color temperature.
When selecting from a setting value (Color Temperature Selection screen), use the crossshaped button (JK) to select the color temperature.
[Setting Values: 7500K, 6500K, 5600K, 5200K, 4800K, 4200K, R3200K, 3000K, 2800K]
To select detailed values (Color Temperature Detailed Selection screen)
Press the crossshaped button (I) to display the Color Temperature Detailed Selection screen.
Use the crossshaped button (JK) to select a color temperature.
[Setting Values: 2300K to 15000K (in 100K increments)]
Memo :
Use the crossshaped button (I) to switch between the Color Temperature Selection screen and the Color Temperature Detailed Selection screen.
Memory A Mode (A), Memory B Mode
(B)
Set to the white balance saved in Memory A or Memory B.
When the [WHT BAL B/A/PRESET] selection switch is set to “A” or “B”, press the [,] button to execute white balance. The white balance will be automatically adjusted and the adjusted value will be saved in Memory A or Memory B.
1Prepare the camera recorder.
ASet the [POWER ON/OFF(CHG)] switch to “ON”.
BPress the [IRIS] button to set to the Auto mode.
CSet the [FULL AUTO] switch to “OFF”.
2Set the [ND FILTER] switch according to the
lighting.
( P56 [Setting the ND Filter] )
3Set the [WHT BAL B/A/PRESET] selection switch to “A” or “B”.
4Locate a place with similar lighting conditions as the object to be shot, place a white object near the center of the screen and zoom in to fill the screen with white.
5Press the [,] (Auto White Balance) button.
The white detection frame appears when Auto White Balance is activated. Fill the frame with white completely.
“AUTO WHITE A OPERATION” or “AUTO WHITE B OPERATION” appears on the viewfinder when Auto White Balance is activated.
When the correct white balance is achieved, “AUTO WHITE A OK” or “AUTO WHITE B OK” appears for about 3 seconds together with the approximate color temperature.
Shooting
57
