Monitor

For setting the audio sound of the [+] terminal to stereo or mixed sound when the [MONITOR] switch on the LCD monitor is set to “BOTH”.

 Mix:

Outputs mixed sound (mixed sound of CH1 and CH2) to both L and R.

 Stereo:

Outputs stereo sound (outputs audio sound of CH1 to L, and CH2 to R).

[Setting Values: RMix, Stereo]

Memo :

If both CH1 and CH2 are built­in microphones, stereo sound is output from the [+] terminal regardless of the [Monitor] setting.

Alarm Level

For selecting whether to turn on the warning tone as well as setting the volume.

The warning tone is output from the monitor speaker or [+] terminal.

[Setting Values: RHigh, Middle, Low, Off]

Audio On FULL AUTO

For setting whether to enable Auto for audio when [FULL AUTO] is set to “ON”.

 SW Set:

Sets the audio recording mode following the [CH1/CH2 AUTO/MANUAL] selection switch setting.

 Auto:

Sets audio recording mode to the forced auto mode.

[Setting Values: SW Set, RAuto]

System Menu

This menu screen allows system­related settings. For specifying recording settings, formatting and restoring of SD card, tally lamp settings, network settings, date/time, time zone, and other settings. It can also be used to reset the menu settings to their default values.

Record Set...

For specifying recorded video­related settings. ( P111 [Record Set Item] )

Media

Format Media

For formatting (initializing) an SD card.

Select a card slot (A or B), select [Format] from [Cancel]/[Format], and press the Set button (R) to format (initialize) the card.

( P41 [Formatting (Initializing) SD Cards] )

Restore Media

For restoring an SD card.

Select a card slot (A or B), and press the Set button (R) to restore the SD card.

( P42 [Restoring the SD Card] )

Memo :

This item appears only when the SD card needs to be restored. However, it is not selectable when recording in Camera mode and during Clip Review.

Setup File

This allows you to save the menu settings as well as the performance results of shutter speed and AWB.

It is useful to save settings according to different shooting conditions.

Load File...

Loads the settings.

( P131 [Loading a Setup File] )

Store File...

Saves the settings.

( P130 [Saving Setup Files] )

Delete File...

Deletes the configured file.

( P132 [Deleting Setup Files] )

Menu Display and Detailed Settings

109

Page 109
Image 109
JVC GY-HM650U specifications System Menu, 109